SHEHDS LED 250W Profile Manwal sa Instruksyon sa Pagsiga sa Leko

1. Pasiuna

Thank you for choosing the SHEHDS LED 250W Profile Leko Lighting. This professional stage lighting fixture is designed to provide high-quality, versatile illumination for various events, including discos, theaters, weddings, and catwalk stages. This manual provides essential information for safe and effective operation, setup, and maintenance of your new lighting unit. Please read it thoroughly before use.

2. Impormasyon sa Kaluwasan

• Always connect the unit to a grounded power outlet.
• Siguruha nga ang voltage matches the specifications of the unit (AC100~240V).
• Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
• Likayi ang direktang pagkaladlad sa mata sa tinubdan sa kahayag.
• Siguruha nga husto ang bentilasyon sa palibot sa yunit aron malikayan ang sobrang kainit.
• Keep the unit away from moisture, rain, and flammable materials.
• Mount the fixture securely using appropriate clamps ug mga kable sa kaluwasan.

3. Mga Sulod sa Pakete

Upon unpacking, please verify that all items listed below are included and in good condition:

• 1 x Ellipsoidal Profile Leko Light
• 1 x 1.2 Meter DMX Cable
• 1 x 1.2 Meter Power Cable (EU, US, AU, or UK Plug type depending on selection)
• 1 x User Manual

4. Tapos sa Produktoview

4.1 Pangunang mga Bahin

• Taas nga Gahum nga LED: Equipped with a 250W LED light source.
• Mga kapilian sa kolor: Available in RGBW (Red, Green, Blue, White) or Warm Cool White configurations.
• Anggulo sa Beam: Fixed 17° beam angle, suitable for a wide range of applications.
• Manwal nga Focus: Easy manual focus for clear and sharp images.
• Light Shutters: Four manual light shutters allow for precise beam shaping and pattern creation.
• Mga Pamaagi sa Pagdumala: DMX512, Master/Slave, Auto, Voice Control.
• Pag-adjust sa kahayag: Linearly adjustable from 0-100% (16-bit).
• Malungtaron nga Balay: Black aluminum alloy case.

4.2 Mga sangkap

The fixture comprises several key internal and external components:

• Stable nga Power Supply: Ensures consistent power delivery.
• LED Display + Control Panel: For mode selection and parameter adjustment.
• Circuit Of Control System: Manages DMX and internal functions.
• Tinubdan sa Light Light: The primary light-emitting component.
• Mga pultahan sa kamalig: Adjustable flaps to shape the light beam.
• Cooling Fan: Dissipates heat to maintain optimal operating temperature.

4.3 Control Panel

The rear control panel provides access to all settings and connections:

• Gipakita nga LED: Shows current mode and parameter values.
• Butang sa MENU: Accesses the main menu and confirms selections.
• PATAY nga Butang: Navigates down through menu options or decreases values.
• Butang sa UP: Navigates up through menu options or increases values.
• ENTER Button: Confirms selections or enters sub-menus.
• Fuse: Power fuse compartment.
• POWER IN/OUT: Power connection ports.
• DMX IN/OUT: DMX signal connection ports for control.

4.4 Manual Focus and Shutters

The fixture features a manual focus system and four light shutters for precise control over the light beam.

• Movable Strong Tripod: Provides stable positioning.
• 4pcs Manual Light Shutters: Used to cut and shape the light beam.
• Focusing Track: Allows the lens to move for focusing.
• Tightening Knob: Secures the focus position.

5. Pag-setup

5.1 Pag-mount

The fixture is designed for self-contained installation. Use the integrated bracket to position the light on a flat surface or mount it to a truss system using appropriate clamps (not included). Ensure the mounting surface or truss can support the weight of the fixture (8.95 kg) and any additional accessories. Always use a safety cable when mounting overhead.

5.2 Koneksyon sa Gahum

1. Connect the provided power cable to the POWER IN port on the control panel.
2. Plug the other end of the power cable into a grounded AC100~240V, 50/60Hz power outlet.
3. If linking multiple units, use the POWER OUT port to connect to the POWER IN of the next fixture. Ensure the total power draw does not exceed the circuit's capacity.

5.3 DMX nga Koneksyon (Opsyonal)

To control the fixture via DMX, connect a DMX controller:

1. Connect the DMX OUT of your DMX controller to the DMX IN port of the first fixture using a DMX cable.
2. For multiple fixtures, connect the DMX OUT of the first fixture to the DMX IN of the next, creating a daisy chain.
3. Ensure the last fixture in the chain has a DMX terminator connected to its DMX OUT port for stable signal transmission.

6. Mga Instruksyon sa Pag-opera

6.1 Power On/Off

Once connected to power, the unit will automatically power on. To power off, disconnect from the main power supply.

6.2 Pag-navigate sa Menu

Use the MENU, DOWN, UP, and ENTER buttons on the control panel to navigate and adjust settings:

• Press MENU to enter the main menu or cycle through options.
• Paggamit UP ug UBOS to scroll through menu items or change values.
• Press PAGSULOD to select an option or confirm a setting.

6.3 Mga Mode sa Pag-opera

The fixture supports several operating modes:

• DMX512 Mode: For professional control via a DMX controller. Set the DMX address using the control panel. (2in1: 4 DMX Channels; 4in1: 9 DMX Channels)
• Master/Slave Mode: Link multiple units where one acts as the master and others as slaves, synchronizing their effects.
• Auto Mode: The fixture runs through pre-programmed light shows automatically.
• Mode sa Pagkontrol sa Tingog: The light reacts to sound, suitable for music-driven environments.
• Pasadya nga Mode: Allows for user-defined settings and effects.

6.4 Brightness and Strobe

• Kahayag: Adjust the light intensity linearly from 0-100% with 16-bit precision via the menu or DMX.
• Strobe: Activate and adjust the strobe effect from 0-25Hz.

6.5 Pagpili sa Kolor

Depending on your model (RGBW or Warm Cool White), you can select and mix colors:

• RGBW Model: Mix Red, Green, Blue, and White LEDs to create a wide spectrum of colors.
• Warm Cool White Model: Adjust between warm white (2500K) and cool white (7500K) for various ambient lighting needs.

6.6 Manual Focus Adjustment

To achieve a clear and sharp projection:

1. Loosen the Tightening Knob on the side of the fixture.
2. Slide the Focusing Track forward or backward until the desired sharpness is achieved.
3. Tighten the Tightening Knob to secure the focus position.

6.7 Beam Shaping with Shutters

Use the four manual light shutters to precisely shape the light beam or create custom patterns. Adjust each shutter individually to cut off parts of the light field as needed.

7. Pagmentinar

• Paglimpyo: Regularly clean the lens and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Paglimpyo sa Fan: Periodically check and clean the cooling fan vents to ensure unobstructed airflow.
• Pagpuli sa Fuse: If the unit does not power on, check the fuse located in the FUSE compartment on the control panel. Replace with a fuse of the same type and rating.
• Pagtipig: Kung dili gamiton, ibutang ang kabit sa usa ka uga, walay abog nga palibot.

8. Pagsulbad sa problema

9. Mga detalye

10. Mga Tip sa Gumagamit

• The fixture operates within a wide voltage range of 90-240V, making it versatile for different power standards.
• For optimal visual effects, especially with beam visibility, operation in a smoke or haze environment is recommended.
• While the beam angle is fixed at 17°, the manual focus allows for clear projection at various distances. If you require different beam angles, consider models specifically designed for variable zoom.

11. Garantiya ug Suporta

This SHEHDS LED 250W Profile Leko Lighting comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer directly. Contact information can typically be found on the product packaging or the official SHEHDS website.