Pasiuna
The Gulikit NS40T TMR Joystick is a high-quality replacement component designed for Nintendo Switch, Nintendo Switch OLED, and Nintendo Switch Lite Joy-Cons. Utilizing advanced TMR (Tunnel Magnetoresistance) Electromagnetic Sensor technology, this joystick offers a contactless mechanism that eliminates wear and tear, prevents stick drift, and ensures long-lasting durability. It provides a highly precise response, resolving common issues like carbon film joystick jittering. The design also features replaceable stick caps for customization and easy maintenance.
Image: Gulikit TMR Joystick module, ready for installation into a Joy-Con.
Pangunang mga bahin
- TMR Electromagnetic Sensor: Provides a simpler and more reliable joystick structure.
- Contactless Mechanism: Ensures no wear and tear, preventing stick drift and enhancing durability.
- Taas nga Resolusyon: Delivers precise control and eliminates carbon film joystick jittering issues.
- 100% Fitable: Designed for a perfect, hassle-free replacement in compatible Joy-Cons.
- Replaceable Stick Cap Design: Allows for easy customization and replacement of joystick caps.
- Lakip nga mga accessories: Comes with 6 different colored joystick caps.
Image: Diagram illustrating the TMR sensing contactless mechanism within the joystick.
Image: Visual representation of a Joy-Con joystick with smooth, high-resolution movement, highlighting the absence of jittering.
Pag-setup ug Pag-instalar
Importante nga Nota: This kit is intended for upgrade and repair use. Replacing a joystick requires disassembling the Joy-Con, which involves small components and delicate connections. Please ensure you possess adequate technical skills and appropriate tools before attempting a full joystick replacement. Improper installation can damage your device.
Joystick Cap Installation Guide:
- Remove Original Cap: Pinch the existing joystick cap and pull it upward with force to detach it from the joystick module.
- Install Replacement Cap: Place the dust cover (if applicable) and then press the replacement joystick cap vertically down onto the joystick shaft until it clicks into place.
Image: Step-by-step diagram illustrating the removal of an old joystick cap and the installation of a new one.
Full Joystick Module Replacement:
For replacing the entire joystick module, refer to online repair guides or videos specific to your Nintendo Switch model (Switch, Switch OLED, or Switch Lite). These guides typically involve:
- Opening the Joy-Con casing.
- Disconnecting ribbon cables.
- Removing screws securing the old joystick.
- Installing the new Gulikit NS40T TMR Joystick.
- Reconnecting cables and reassembling the Joy-Con.
Image: A Nintendo Switch console with its Joy-Cons detached, showcasing the compact size and perfect fit of the replacement joystick modules.
Mga Instruksyon sa Pag-opera
Once installed, the Gulikit NS40T TMR Joystick functions identically to the original Joy-Con joystick. No special calibration or software is typically required, as the TMR sensor technology is designed for direct replacement. Simply use your Joy-Con as normal for gaming and navigation.
- Ensure the Joy-Con is properly paired with your Nintendo Switch console.
- Test the joystick's movement and button presses in the Switch's controller calibration settings to confirm full functionality.
Pagmentinar
The TMR sensing contactless mechanism significantly reduces the need for frequent maintenance compared to traditional joysticks. However, general care can prolong the life of your Joy-Cons and the new joystick:
- Paglimpyo: Periodically wipe the joystick caps and surrounding areas with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
- Pagtipig: Store your Joy-Cons in a clean, dry environment when not in use.
- Cap Replacement: The replaceable stick cap design allows for easy swapping if a cap becomes worn or damaged.
Image: A selection of six different colored joystick caps, demonstrating the customization options.
Pag-troubleshoot
While the Gulikit NS40T TMR Joystick is designed to prevent common issues like drift and jitter, if you encounter any problems after installation, consider the following:
- No Response/Incorrect Input:
- Ensure all ribbon cables inside the Joy-Con are securely connected.
- Verify the joystick module is correctly seated and screwed into place.
- Try re-pairing the Joy-Con with your Nintendo Switch.
- Perform a joystick calibration through the Nintendo Switch system settings (System Settings > Controllers and Sensors > Calibrate Control Sticks).
- Pisikal nga kadaot: If the joystick or caps appear physically damaged, they may need replacement.
Mga detalye
| Hiyas | Detalye |
|---|---|
| Ngalan sa Brand | GuliKit |
| Numero sa Modelo | NS40T (Gulikit NS40 Hall Joystick) |
| Matang sa mga aksesorya | Button (Joystick) |
| Nahiuyon nga Brand/Modelo | Nintendo |
| Modelo sa Nintendo nga Kompatible | Nintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite |
| Sinugdanan | Mainland China |
| Naglakip sa Package | TMR Joystick ×2, Joystick Caps ×6 |
| Mga Dimensyon sa Pakete (gibanabana) | Gitas-on: 10 cm, Lapad: 10 cm, Taas: 5 cm |
| Timbang sa Pakete (gibanabana.) | 0.2 kg |
Image: Product packaging displaying the brand, model, and included items.
Mga Tip sa Gumagamit
- Tan-awa ang mga Tutorial: If you're new to Joy-Con repair, search for detailed video tutorials online before starting the installation process.
- Pag-organisar sa mga Bahin: Keep track of all small screws and components during disassembly to ensure proper reassembly.
- Static Precautions: Take precautions against static electricity when handling internal electronic components.
- Pagsulay sa hingpit: After installation, thoroughly test the joystick's functionality in various games and the Switch's calibration settings.
Garantiya ug Suporta
For any questions regarding the Gulikit NS40T TMR Joystick, installation assistance, or potential issues, please contact the seller or manufacturer's customer support. Keep your purchase records for any warranty claims.
