Pasiuna
This manual provides detailed instructions for the setup, operation, and maintenance of your Rollerhouses RF 433.92MHz Remote Control. This remote is designed to control motorized windows, shades, and blinds, offering convenient wireless operation. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The remote control is available in 5-channel (BF-305) and 15-channel (BF-315) versions, allowing for individual or group control of multiple motorized units.
Natapos ang Produktoview
The Rollerhouses remote control features a sleek design with intuitive buttons for controlling your motorized blinds and shades. It operates on a 433.92 MHz RF frequency, providing a stable signal and a wireless range of up to 235 feet indoors without the need for complex wiring.
Figure 1: Remote Control Layout and Dimensions (Approx. 1.8" x 4.8")
Figure 2: Key Features of the Remote Control
Setup
1. Unboxing and Battery Installation
Upon receiving your remote control, carefully unbox the package. The remote requires a CR2032 coin cell battery, which is typically included. Follow these steps to install the battery:
- Gently slide open the battery compartment cover on the back of the remote.
- Insert the CR2032 battery with the positive (+) side facing upwards.
- Isira ang tabon sa kompartamento sa baterya nga lig-on.
Video 1: Unboxing and Battery Installation Guide
2. Mounting the Remote
The remote control comes with a wall-mount bracket for convenient storage and access. To mount the remote:
- Choose a suitable location on a wall, ensuring it's within easy reach and line of sight to the motorized units if possible (though RF does not require line of sight).
- Use the provided screws and wall anchors to secure the mounting bracket to the wall.
- Slide the remote control into the mounted bracket.
3. Pairing with Motorized Units
The remote control operates using fixed RF codes at 433.92 MHz. It is designed to be compatible with Rollerhouses RF blinds products or as a replacement for units using the same RF protocol and remote shape. The pairing process typically involves a learning function on your motorized unit. Consult the instruction manual for your specific motorized blinds/shades for detailed pairing steps. A general procedure often includes:
- Put your motorized unit into pairing mode (usually by pressing a button on the motor itself or cycling power).
- While the unit is in pairing mode, press and hold the 'Stop' button on your Rollerhouses remote control until the motorized unit responds (e.g., jogs slightly, beeps).
- For multi-channel remotes (BF-305/BF-315), you will then select the desired channel (1-5 or 1-15) and confirm the pairing.
Important: This remote is specifically designed for Rollerhouses RF motors. Compatibility with other brands or different RF protocols is not guaranteed. Please verify compatibility before attempting to pair.
Mga Instruksyon sa Pag-opera
Your Rollerhouses remote control allows for easy operation of your motorized blinds and shades. The buttons are clearly labeled for intuitive use:
- Up (▲) Button: Press to raise the blinds/shades.
- Stop (□) Button: Press to stop the blinds/shades at their current position.
- Down (▼) Button: Press to lower the blinds/shades.
- Channel (◀ / ▶) Buttons: Use these buttons to cycle through the available channels (1-5 for BF-305, 1-15 for BF-315). The selected channel number will typically be indicated by an LED or display on the remote.
Individual and Group Control
The multi-channel remotes (BF-305 and BF-315) allow you to control individual blinds or groups of blinds:
- Individual Control: Select the desired channel corresponding to a specific blind using the Channel buttons, then use the Up, Stop, and Down buttons.
- Pagkontrol sa Grupo: Most multi-channel remotes have a dedicated 'All' or 'Group' channel (often indicated by a specific channel number or a separate button) that allows you to control all paired blinds simultaneously. Refer to your motor's manual for specific group programming instructions.
Figure 3: Operating multiple motorized blinds with the remote
Figure 4: Remote control in use with motorized shades
Pagmentinar
Pagpuli sa Baterya
When the remote's range decreases or it becomes unresponsive, it's likely time to replace the battery. The remote uses a CR2032 coin cell battery.
- I-slide ang bukana sa takup sa baterya sa likud sa hilit.
- Kuhaa ang daan nga CR2032 nga baterya.
- Insert a new CR2032 battery with the positive (+) side facing upwards.
- Isira ang tabon sa kompartamento sa baterya.
Paglimpyo
To clean the remote control, wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.
Pag-troubleshoot
| Problema | Posibleng Hinungdan | Solusyon |
|---|---|---|
| Remote not responding to motorized unit. | Low battery, remote not paired, or compatibility issue. | Replace battery. Re-attempt pairing process. Ensure the remote is compatible with your specific motorized unit (Rollerhouses RF motors). |
| Motorized unit responds intermittently or with reduced range. | Low battery, interference, or distance. | Replace battery. Reduce distance between remote and unit. Check for potential sources of RF interference (e.g., other wireless devices). |
| Remote keeps resetting itself or will not accept programming. | Faulty battery or internal issue. | Ensure battery is new and correctly installed. If the issue persists, contact customer support for a replacement. |
| Remote does not work with my existing motorized blinds. | Incompatibility with non-Rollerhouses motors or different RF protocols. | This remote is designed for Rollerhouses RF blinds products. It may not be compatible with other brands (e.g., Simu hz radio controlled motors) or different RF frequencies/protocols. Verify your motor's brand and RF specifications. |
Mga detalye
| Feature | Detalye |
|---|---|
| Mga Numero sa Modelo | BF-305 (5-Channel), BF-315 (15-Channel) |
| Brand | Mga rollerhouse |
| Uri sa Pagkontrol | Wireless RF Remote Control |
| Frequency sa RF | 433.92 ,XNUMX MHz |
| Mga kanal | 5 or 15 (selectable) |
| wireless Range | Up to 235 feet (indoor) |
| Tinubdan sa Gahum | 1 x CR2032 Coin Cell Battery (included) |
| Mga sukat | Approx. 1.8" (W) x 4.8" (L) |
| Wiring Gikinahanglan | Dili |
| Wattage | 1W |
| Sinugdanan | Mainland China |
Mga Tip sa Gumagamit
- I-verify ang pagkaangay: Sa dili pa mopalitasing or attempting to pair, always confirm that your motorized blinds or shades are Rollerhouses brand and utilize the 433.92 MHz RF protocol. This remote is not universally compatible with all brands or RF systems.
- Pagsusi sa Baterya: If your remote seems unresponsive or has reduced range, the first step is always to replace the CR2032 battery.
- Hupti nga Magamit ang mga Instruksyon: Store this manual and the manual for your motorized units in a safe place for future reference, especially for pairing procedures.
Garantiya ug Suporta
Rollerhouses offers replacement controllers for electric blinds in cases of manufacturing defects such as scratches on the face, setup issues during installation, constant resetting, or inability to accept programming. If you experience any issues with your remote control, please contact the seller directly for assistance and warranty claims. Provide your order details and a clear description of the problem to facilitate a quick resolution.
