Quectel BG96 USB Dongle

Manwal sa Gumagamit sa Quectel BG96 USB Dongle

LTE Cat M1/NB1/EGPRS Module with GPS/BD/Glonass Antenna Support

1. Pasiuna

The Quectel BG96 is a high-performance, ultra-low power LTE Cat M1/Cat NB1/EGPRS module designed for a wide range of Machine-to-Machine (M2M) and Internet of Things (IoT) applications. This USB dongle variant provides convenient connectivity with global frequency band support and integrated GNSS capabilities (GPS, BeiDou, Glonass). Its compact design and robust features make it suitable for applications requiring reliable and efficient wireless communication.

Quectel BG96 USB Dongle with 4G and GPS antennas
Figure 1: Quectel BG96 USB Dongle with included 4G and GPS antennas.

2. Mga Produkto sa Produkto

  • LTE Cat M1/Cat NB1/EGPRS module with ultra-low power consumption.
  • Compact SMT form factor, ideal for size-constrained applications.
  • Easy migration from existing GSM/GPRS, UMTS/HSPA, and LTE modules.
  • Advanced LGA package for automated manufacturing.
  • Supports a rich set of Internet protocols.
  • Industry-standard interfaces: USB, UART, I2C, Status Indicator.
  • Abundant functionalities including USB drivers for Windows 7/8/8.1/10, Linux, and Android.
  • Integrated GNSS (GPS, BeiDou, Glonass) for positioning applications.
Quectel BG96 module held in hand, illustrating compact size
Figure 2: The compact size of the BG96 module, suitable for narrow spaces.

3. Mga Sulod sa Pakete

Ensure all items are present and in good condition:

  • 1x Quectel BG96 USB Dongle
  • 1x 4G Antenna (TS9 Connector)
  • 1x GPS+BD+Glonass Antenna (TS9 Connector)
Quectel BG96 USB Dongle and included antennas
Figure 3: Main components included in the package.

4. Mga Instruksyon sa Pag-setup

  1. Pag-instalar sa SIM Card

    Locate the Nano SIM card slot on the BG96 module. Gently insert your Nano SIM card into the slot until it clicks into place. Ensure the SIM card is oriented correctly as shown in the diagram below.

    Diagram showing Nano SIM slot and serial port pinout
    Figure 4: Nano SIM slot location and serial port pinout.
  2. Koneksyon sa Antenna

    The BG96 module supports two types of antenna interfaces: IPEX 1st generation and TS-9. The provided antennas typically use TS-9 connectors. Connect the 4G antenna to the main antenna interface and the GPS antenna to the GPS antenna interface. Note that TS-9 and IPEX interfaces cannot be used simultaneously for the same function.

    Diagram showing two types of interfaces and antenna connections
    Figure 5: Antenna interface types and connection points. (1) IPEX 1st generation antenna interface, (2) TS-9 antenna interface, (3) TS-9 GPS antenna interface, (4) IPEX 1st generation GPS antenna interface. TS-9 / IPEX cannot be used simultaneously.
  3. Koneksyon sa USB

    Plug the BG96 USB Dongle into an available USB port on your computer or host device. The device will typically be recognized automatically, but drivers may be required for full functionality.

  4. Serial Port Connection (Optional)

    For advanced development or debugging, the module features a 1.25 pitch 5Pin serial port. Refer to Figure 4 for the pinout: 5V, GND, RX, TX, RESET.

5. Mga Instruksyon sa Pag-opera

  1. Pag-instalar sa drayber

    For Windows (7/8/8.1/10), Linux, and Android operating systems, specific USB drivers are available. These drivers are crucial for the host device to properly communicate with the BG96 module. Please refer to the official Quectel documentation for the latest drivers and installation guides. A list of documentation is often provided by the seller, for example:

    Screenshot of product documentation including PDF manuals and driver ZIP files
    Hulagway 6: Example of available product documentation and drivers.

    Example driver files include "Quectel_LTE_Windows_USB_Driver_V1.0.zip" and "Quectel_WCDMA<E_Linux_USB_R01A01.zip".

  2. Koneksyon sa Network

    Once drivers are installed and the SIM card is active, the module should attempt to connect to the cellular network. You can monitor the connection status through the module's status indicator or via AT commands through the serial interface.

  3. Pag-andar sa GNSS

    If using the GPS+BD+Glonass antenna, the module can acquire location data. This functionality is optional and depends on your application's requirements and software configuration.

  4. Pag-apil sa Application

    The BG96 module is designed for M2M and IoT applications such as wireless POS systems, smart metering, asset tracking, and smart wearables. Developers can integrate the module using its various interfaces and supported Internet protocols.

    Examples of M2M and IoT applications for BG96 module
    Figure 7: Diverse applications for the BG96 module.

6. Pagmentinar

  • Hupti ang aparato nga uga ug layo sa kaumog.
  • Likayi nga iladlad ang module sa grabeng temperatura o direkta nga kahayag sa adlaw.
  • Limpyohi ang device gamit ang humok, uga nga panapton. Ayaw paggamit ug mapintas nga mga kemikal o solvents.
  • Ensure antennas are securely connected but do not overtighten.

7. Pagsulbad sa problema

  • Walay Network Connection:
    • Verify that the SIM card is correctly inserted and active.
    • Ensure the 4G antenna is properly connected.
    • Check for network coverage in your area.
    • Confirm that the correct drivers are installed on your host device.
  • Device Not Recognized by PC:
    • Sulayi ang laing USB port.
    • Reinstall the USB drivers.
    • Ensure the USB cable (if any external cable is used) is functional.
  • Poor GNSS Performance:
    • Siguroha nga ang GPS antenna husto nga konektado ug adunay klaro view sa langit.
    • Avoid obstructions that might block satellite signals.

8. Mga detalye

KategoryaFeatureMga Detalye
LTEFDD-LTEB1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/ B19/ B20/ B25*/ B26*/ B28
TDD-LTEB39 (for Cat M1 only)
EGPRSFrequency850/900/1800/1900MHz
Embedded GNSSSuportaOptional (GPS, BeiDou, Glonass)
RehiyonCoverageTibuok kalibutan
Mga Rate sa DataIring M1Max. 375Kbps (DL), Max. 375Kbps (UL)
Iring NB1Max. 32Kbps (DL), Max. 70Kbps (UL)
EDGEMax. 296Kbps (DL), Max. 236.8Kbps (UL)
GPRSMax. 107Kbps (DL), Max. 85.6Kbps (UL)
Mga sukatGidak-on sa Module41.43mm x 24.00mm (gibana-bana)
Mga InterfaceGisuportahanUSB, UART, I2C, Status Indicator
Mga drayberSuporta sa OSWindows 7/8/8.1/10, Linux, Android

*LTE B25 will be supported on BG96 with R1.2 hardware version. Features marked with an asterisk are under development or subject to specific hardware revisions.

Dimensional drawing of the BG96 module
Figure 8: Dimensional drawing of the BG96 module (41.43mm x 24.00mm).

9. Mga Tip sa Gumagamit

  • For optimal cellular signal reception, ensure the 4G antenna is positioned in an open area, away from large metal objects or other electronic devices that might cause interference.
  • When using GNSS, place the GPS antenna with a clear line of sight to the sky for faster and more accurate positioning.
  • Always download the latest drivers and firmware from the official Quectel website or the seller's provided resources to ensure compatibility and performance.
  • If experiencing connectivity issues, try restarting both the host device and the BG96 module.

10. Garantiya ug Suporta

This product typically comes with a 12-month manufacturer's limited warranty. For detailed warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact the seller directly.

For technical assistance, driver downloads, or further documentation (e.g., AT Commands Manuals, Application Notes), please visit the official Quectel website or consult the seller's support channels. Timely technical support is available to minimize design-in time and development efforts.

Relevant documentation may include:

  • Quectel_BG96_AT_Commands_Manual_V2.1.pdf
  • Quectel_BG96_FILE_AT_Commands_Manual_V1.0.pdf
  • Quectel_BG96_FTP(S)_AT_Commands_Manual_V1.0.pdf
  • Quectel_BG96_MQTT_Application_Note_V1.0.pdf
  • Quectel_BG96_NIDD_AT_Commands_Manual_V1.0.pdf
  • Quectel_BG96_PSM_Application_Note_V1.0.pdf
  • Quectel_BG96_TCP(IP)_AT_Commands_Manual_V1.0.pdf

May Kalabutan nga mga Dokumento - BG96 USB Dongle

Si Preview Manwal sa Disenyo sa Hardware sa Quectel BG95 Series LPWA Module
This document provides comprehensive hardware design specifications for the Quectel BG95 Series LPWA modules, detailing interfaces, electrical characteristics, RF performance, mechanical dimensions, and manufacturing guidelines for LTE Cat M1, LTE Cat NB2, and EGPRS applications.
Si Preview Quectel BC660K-GL Hardware Design Guide
Comprehensive hardware design guide for the Quectel BC660K-GL NB-IoT module, detailing its interfaces, features, specifications, and integration guidelines for IoT applications.
Si Preview Disenyo sa Hardware sa Quectel EG21-GL - LTE Standard Module Series
Komprehensibo nga mga espesipikasyon sa disenyo sa hardware para sa Quectel EG21-GL LTE Standard Module Series, nga nagdetalye sa mga bahin, interface, mga espesipikasyon sa RF, ug mga kinaiya sa kuryente para sa mga aplikasyon sa M2M.
Si Preview Quectel EC20 Mini PCIe Hardware Design Guide
This document provides a comprehensive hardware design guide for the Quectel EC20 Mini PCIe LTE module. It covers product overview, interface specifications, electrical and radio characteristics, mechanical dimensions, and application notes for integrating the module into various systems.
Si Preview EG512R-EA Hardware Design - Quectel LTE-A Module
Susiha ang kompletong mga detalye sa disenyo sa hardware para sa Quectel EG512R-EA LTE-A module. Kini nga dokumento nagdetalye sa air interface niini, mga hardware interface, konsepto sa produkto, mga pangunang bahin, ug kaangayan sa aplikasyon para sa M2M ug mobile nga mga solusyon. Importante para sa mga developer nga nag-integrate sa advanced wireless connectivity.
Si Preview Disenyo sa Hardware sa EG915Q-NA - Mga Espisipikasyon sa Quectel LTE Cellular Module
Komprehensibo nga mga espesipikasyon sa disenyo sa hardware para sa Quectel EG915Q-NA LTE Standard Module Series. Kini nga dokumento nagdetalye sa mga bahin, interface, performance sa RF, mga kinaiya sa kuryente, ug mga espesipikasyon sa mekanikal para sa mga aplikasyon sa M2M ug IoT.