Manwal sa Gumagamit sa Mastech MS6300 Multifunctional Environment Meter

1. Pasiuna

The Mastech MS6300 is a versatile digital environment multimeter designed to measure various environmental parameters. This device combines the functions of a Sound Level Meter, Luminometer, Relative Humidity Meter, Temperature Meter, Anemometer, and Air Flow Meter into a single, portable unit. It is suitable for a wide range of applications, including environmental monitoring, industrial hygiene, and HVAC system analysis.

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your MS6300 meter. Please read this manual thoroughly before use and keep it for future reference.

2. Impormasyon sa Kaluwasan

To ensure safe operation and service of the meter, follow these instructions:

• Read all safety information and operating instructions before using the meter.
• Do not operate the meter if it appears damaged or if the protective casing is compromised.
• Keep the meter away from water, dust, and extreme temperatures.
• Do not attempt to repair or modify the meter. Refer servicing to qualified personnel.
• Remove batteries if the meter is not used for an extended period to prevent leakage.
• Ilabay ang mga baterya sa hustong paagi sumala sa lokal nga mga regulasyon.

Kaluwasan sa Baterya

• This device uses one 9V 6F22 battery (not included).
• Siguruha nga husto ang polarity kung mag-install og mga baterya.
• Ayaw pagsagol sa daan ug bag-ong mga baterya, o lain-laing mga matang sa mga baterya.
• Ayaw ibutyag ang mga baterya sa sobra nga kainit o kalayo.

3. Tapos sa Produktoview

The Mastech MS6300 is designed for ease of use with a clear LCD dual display and intuitive controls. Below are the key components and their functions:

• Windproof Ball: Covers the microphone for sound level measurements.
• Power Switch: I-on/off ang device.
• Set Button: Used to select AVG/MAX/MIN/DIF (MAX-MIN) modes.
• Temperatura ug Humidity Sensor: Measures ambient temperature and relative humidity.
• Illumination Button: Activates the light sensor.
• Backlight Button (BL): I-toggle ang backlight sa display.
• Wind Speed and Air Volume Sensor: Measures air flow and wind speed.
• LCD Display: Shows measurement readings and unit indicators.
• Butang sa UNIT: Changes measurement units (e.g., °C/°F, m/s/knots, LUX/FC, dB(A)/dB(C), CMM/CFM).
• HOLD Button: Mopahunong sa kasamtangang pagbasa sa display.
• Butang sa MODE: Cycles through different measurement functions (Sound Level, Luminometer, Humidity/Temperature, Anemometer, Air Flow).
• Bukid sa Tripod: Located at the bottom for stable placement.

4. Pag-setup

4.1 Pag-instalar sa Baterya

1. Pangitaa ang tabon sa kompartamento sa baterya sa luyo sa metro.
2. Paggamit og screwdriver aron maablihan ang kompartamento sa baterya.
3. Insert one 9V 6F22 battery, ensuring the correct polarity (+/-).
4. Ibalik ang tabon sa kompartamento sa baterya ug i-secure kini gamit ang screw.

Note: Batteries are not included with the product.

4.2 Inisyal nga Pag-on

Pindota ang GAHUM button to turn on the meter. The LCD display will illuminate, and the meter will perform a self-test before entering the default measurement mode.

5. Mga Instruksyon sa Pag-opera

5.1 Kinatibuk-ang Operasyon

• Pag-on/Pagpatay: Pindota ang GAHUM butones.
• Backlight: Pindota ang BL buton aron i-on o i-off ang backlight sa display.
• Paghupot sa datos: Pindota ang HAWAT button to freeze the current reading. Press again to release.
• Pagpili sa Mode: Pindota ang MODE button to cycle through the different measurement functions: Sound Level, Luminometer, Humidity/Temperature, Anemometer (Wind Speed), and Air Flow.
• Pagpili sa Yunit: Sa matag mode, pindota ang UNIT button to change the measurement units.

5.2 Sound Level Measurement

1. Turn on the meter and select Sound Level mode using the MODE butones.
2. Pindota ang UNIT button to select between dB(A) or dB(C) weighting.
3. Position the microphone towards the sound source.
4. The sound level will be displayed on the LCD.
5. Gamita ang SET button to cycle through AVG (Average), MAX (Maximum), MIN (Minimum), and DIF (Difference between MAX and MIN) values.

5.3 Luminance Measurement (Luminometer)

1. Turn on the meter and select Luminometer mode using the MODE butones.
2. Pindota ang UNIT button to select between LUX or FC (Foot-Candle) units.
3. Ensure the light sensor (located near the microphone) is exposed to the light source.
4. The illuminance value will be displayed.
5. Gamita ang SET button for AVG/MAX/MIN/DIF values.

5.4 Humidity and Temperature Measurement

1. Turn on the meter and select Humidity/Temperature mode using the MODE butones.
2. The relative humidity (%RH) and temperature will be displayed simultaneously.
3. Pindota ang UNIT button to switch between Celsius (°C) and Fahrenheit (°F) for temperature.
4. Gamita ang SET button for AVG/MAX/MIN/DIF values.

5.5 Anemometer (Wind Speed) Measurement

1. Turn on the meter and select Anemometer mode using the MODE butones.
2. Pindota ang UNIT button to select desired wind speed units (m/s, ft/min, knots, km/h, mph).
3. Position the wind speed sensor (fan) directly into the airflow.
4. The wind speed will be displayed.
5. Gamita ang SET button for AVG/MAX/MIN/DIF values.

5.6 Air Flow Measurement

1. Turn on the meter and select Air Flow mode using the MODE butones.
2. Pindota ang UNIT button to select between CMM (Cubic Meters per Minute) or CFM (Cubic Feet per Minute).
3. Before measuring air flow, you must input the area of the duct or vent. The meter supports area range 0~999.9m² or 0~999.9ft². Refer to the full manual for detailed instructions on area input.
4. Position the wind speed sensor into the airflow.
5. The air flow rate will be displayed.
6. Gamita ang SET button for AVG/MAX/MIN/DIF values.

6. Mga bahin

• Auto & Manual Ranging: The meter can automatically select the appropriate measurement range or allow manual selection for specific applications.
• Auto Power Off (APO): To conserve battery life, the meter automatically turns off after a period of inactivity.
• AVG/MAX/MIN/DIF (MAX-MIN): Provides statistical analysis of measurements, showing average, maximum, minimum, and the difference between maximum and minimum readings.
• A / C Weighting Indication: For sound level measurements, allows selection between A-weighting (approximates human ear response) and C-weighting (flat response).
• Paghupot sa datos: Freezes the current reading on the display for easy recording.
• Ipakita ang Backlight: Illuminates the LCD for clear visibility in low-light conditions.
• Ubos nga Pagpakita sa Baterya: An indicator on the display warns when the battery level is low, prompting replacement.

7. Mga detalye

The following table details the technical specifications of the Mastech MS6300 Multifunctional Environment Meter:

Kinatibuk-ang Detalye:

• Power Supply: 1x 9V 6F22 Battery
• Gidak-on sa Produkto: 280mm x 89mm x 50mm / 11.0" x 3.5" x 2.0"
• Timbang sa Produkto: 433g / 0.95lb
• Mga Sertipikasyon: CE, RoHS

8. Pagmentinar

• Paglimpyo: Pahiran ang metro gamit ang uga, humok nga panapton. Ayaw gamita ang mga abrasive o solvents.
• Pagtipig: Store the meter in a cool, dry place. If storing for an extended period, remove the battery.
• Pag-atiman sa Sensor:
  • Keep the microphone (windproof ball) clean and free from debris.
  • Siguruha nga ang sensor sa kahayag dili mapugngan.
  • Keep the wind speed/air volume sensor (fan) clear of any foreign objects to ensure accurate readings.
  • Avoid touching the temperature and humidity sensors directly.
• Pagpuli sa Baterya: Ilisan ang 9V nga baterya kung ang ubos nga timailhan sa baterya makita sa display.

9. Pagsulbad sa problema

• Ang metro wala maka-on:
  • Check if the battery is installed correctly with the right polarity.
  • Replace the 9V battery with a new one.
• Dili tukma nga mga pagbasa:
  • Siguroha nga ang mga sensor limpyo ug walay babag.
  • Verify the meter is in the correct measurement mode and units.
  • Allow the meter to stabilize in the environment before taking readings, especially for temperature and humidity.
  • For air flow, ensure the correct area has been input.
• Ang display madulom o nagkidlap-kidlap:
  • Ilisan ang baterya.
  • Check if the backlight is activated; deactivate if not needed to save power.

10. Mga Tip sa Gumagamit

• Mga Sukod nga Lig-on: For best results, especially with wind speed and air flow, use the included tripod to keep the meter stable and ensure the sensor is directly facing the airflow.
• Environmental Acclimation: When moving the meter between environments with significant temperature or humidity differences, allow a few minutes for the sensors to acclimate to the new conditions before taking critical measurements.
• Regular nga Paglimpyo: Periodically clean the wind speed sensor (fan) and light sensor to prevent dust and debris from affecting accuracy.

11. Garantiya ug Suporta

The Mastech MS6300 Multifunctional Environment Meter is designed and manufactured to high-quality standards and is CE and RoHS certified. For any technical support or warranty inquiries, please refer to the contact information provided by your retailer or the official MasTech website.

Palihug tipigi ang resibo sa imong pagpalit isip pruweba sa pagpalit para sa katuyoan sa warranty.