Manwal sa Paggamit sa DARK Flash DS900 ARGB Mid Tower PC Case

1. Pasiuna

The DARK Flash DS900 ARGB is a high-performance Mid Tower PC case designed for enthusiasts seeking excellent airflow, spacious component support, and vibrant addressable RGB lighting. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DS900 PC case.

2. Mga Sulod sa Pakete

Please verify that all components are present in the package:

• DARK Flash DS900 ARGB PC Case
• Accessory Box (screws, standoffs, cable ties, user manual)

3. Pag-setup ug Pag-instalar

Follow these steps to install your PC components into the DS900 case.

3.1 Preparing the Case

1. Unpack the Case: Carefully remove the DS900 from its packaging.
2. Kuhaa ang mga side panel: The tempered glass side panel is typically secured with thumbscrews or a latch mechanism. Remove it to access the interior. The steel side panel on the opposite side should also be removed for cable management.

3.2 Pag-instalar sa Component

1. Pag-instalar sa Motherboard:
   • I-install ang I/O shield sa likod nga buho sa case.
   • Align your ATX, Micro-ATX, or Mini-ITX motherboard with the pre-installed standoffs. Ensure all screw holes align.
   • I-secure ang motherboard gamit ang gihatag nga mga screw.
2. Pag-instalar sa Power Supply Unit (PSU):
   • The DS900 supports ATX PSUs up to 200mm in length.
   • Install the PSU into its dedicated compartment at the bottom rear of the case, typically from the rear.
   • I-secure ang PSU gamit ang mga screw.
3. Pag-instalar sa Storage Drive:
   • The case supports 2x 3.5" HDDs and 2x 2.5" SSDs.
   • Locate the drive cages/mounts. For 3.5" HDDs, slide them into the drive cage and secure with screws. For 2.5" SSDs, mount them to the designated trays or locations.
4. Graphics Card (GPU) Installation:
   • The DS900 supports GPUs up to 400mm in length.
   • Remove the necessary PCIe slot covers from the rear of the case.
   • Insert your graphics card into the appropriate PCIe slot on the motherboard and secure it with a screw or latch.
5. Cooling System Installation (Fans/Radiators):
   • Ang kaso nagtanyag og halapad nga suporta sa pagpabugnaw:
     • Front: 3x 120mm/140mm fans or 240/280/360mm radiator
     • Top: 3x 120mm/140mm fans or 240/280/360mm radiator
     • Likod: 1x120mm fan
     • Bottom: 2x 120mm fans
   • Install your chosen fans or radiators in their respective locations, securing them with screws.
   • Ensure proper airflow direction (intake/exhaust).

3.3 Cable Management and Front I/O Connections

1. Pagdumala sa Kable: Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.
2. Front I/O Connections: Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

3.4 Katapusan nga Asembliya

1. Once all components are installed and cables are managed, reattach the steel side panel and then the tempered glass side panel.
2. Siguroha nga ang tanan nga mga screw hugot nga hugot.

4. Mga Instruksyon sa Pag-opera

4.1 Pag-on

Press the power button located on the front I/O panel to turn on your computer.

4.2 ARGB nga Pagkontrol sa Kahayag

The DS900 supports Addressable RGB (ARGB) lighting. If your motherboard has a 5V 3-pin ARGB header, you can connect the case's ARGB cables to it and control the lighting effects via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). If your motherboard does not have an ARGB header, an external ARGB controller (not included) may be required for lighting control.

4.3 Front I/O Ports

The front I/O panel provides convenient access to:

• 1x USB 3.0 port
• 2x USB 2.0 nga mga pantalan
• HD Audio (headphone and microphone jacks)
• Butang sa Gahum
• I-reset ang Butang

5. Pagmentinar

Ang regular nga pagmentinar makatabang sa pagsiguro sa labing maayo nga performance ug taas nga kinabuhi sa mga component sa imong PC.

5.1 Dust Filters

The DS900 is equipped with removable dust filters on the top and bottom. Periodically remove and clean these filters to prevent dust buildup inside the case, which can hinder airflow and component cooling.

• Gently slide out the filters.
• Clean them with a soft brush or rinse with water (ensure they are completely dry before reinstallation).

5.2 Tempered Glass Panels

Clean the tempered glass panels with a microfiber cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that could damage the glass or coatings.

5.3 Paglimpyo sa Sulod

Occasionally, use compressed air to blow out dust from inside the case, especially around fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.

6. Pagsulbad sa problema

Here are some common issues and potential solutions:

• PC does not power on:
  • Check if the PSU is properly connected to the wall outlet and switched on.
  • Siguruha nga ang tanang kable sa kuryente (24-pin ATX, 8-pin CPU, PCIe power) lig-on nga nakakonekta sa motherboard ug mga component.
  • Verify the front panel power switch cable is correctly connected to the motherboard header.
• Fans are not spinning:
  • Check if fan cables are securely connected to the motherboard fan headers or a fan controller.
  • Ensure the PSU is providing power.
• ARGB lighting is not working:
  • Verify the ARGB cable is correctly connected to a 5V 3-pin ARGB header on your motherboard (not a 12V 4-pin RGB header).
  • Ensure your motherboard's RGB software is installed and configured correctly.
  • If using an external controller, check its power and connections.
• USB ports not functioning:
  • Check if the front panel USB 3.0 and USB 2.0 cables are correctly connected to their respective headers on the motherboard.

7. Mga detalye

8. Mga Tip sa Gumagamit

• Pag-optimize sa Airflow: With support for multiple fans, consider a balanced intake and exhaust fan configuration for optimal cooling performance. Typically, front and bottom fans as intake, and top and rear fans as exhaust.
• Pagdumala sa Kable: Take your time with cable management behind the motherboard tray. This not only improves aesthetics but also prevents cables from obstructing airflow.
• Pag-sync sa ARGB: If your motherboard supports ARGB sync, connect the case's ARGB cables to the motherboard's 5V 3-pin header to synchronize lighting effects across your system.
• Paglimpyo sa Abog Filter: Regularly clean the magnetic dust filters to maintain good airflow and keep the interior dust-free.

9. Garantiya ug Suporta

For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. You can also visit the official darkFlash website for more resources:

www.darkflash.com