Manwal sa Instruksyon

1. Pasiuna

This manual provides essential information for the proper installation, operation, and maintenance of your M30*1.5mm Threaded Thermostatic Radiator Valve. Please read these instructions carefully before use to ensure safe and efficient operation and to maximize the lifespan of your product.

2. Mga Produkto sa Produkto

• Malungtaron nga Pagtukod: Made from a combination of alloy and plastic, designed for wear resistance and long-lasting performance without deformation or damage.
• Precise Compatibility: Features an M30x1.5mm threaded connection for seamless integration with compatible radiator valve setups.
• Napasibo nga Pagkontrol sa Temperatura: Offers five adjustable temperature levels, allowing users to easily set the desired warmth for their space.
• Enerhiya nga Episyente nga Operasyon: Includes anti-freeze protection and room temperature regulation to maintain consistent heating without relying on external energy sources, promoting energy savings.

3. Mga detalye

4. Pag-setup ug Pag-instalar

Before installation, ensure the heating system is turned off and cooled down to prevent injury.

1. Susihon ang pagkaangay: Verify that your existing radiator valve body has an M30x1.5mm threaded connection. This is crucial for proper fit and function.
2. Prepare the Valve: Ensure the valve head and the radiator valve body are clean and free from debris.
3. Posisyon: For accurate room temperature measurement, position the valve head correctly. Avoid placing it where it will be exposed to direct sunlight, drafts, or covered by curtains or furniture, as this can affect its performance.
4. Ibutang ang Ulo: Carefully screw the thermostatic radiator valve head onto the threaded connection of the radiator valve body. Hand-tighten until secure, but do not overtighten.
5. Inisyal nga Setting: Once installed, you can set the desired temperature level using the dial.

Biswal nga Tabang:

Hulagway: Ubos view of the valve head, illustrating the M30x1.5mm threaded connection.

5. Mga Instruksyon sa Pag-opera

The thermostatic radiator valve allows you to control the heat output of individual radiators based on the room temperature. The dial on the valve head has several settings:

• Setting '0': The valve is closed, and the radiator will not heat up.
• Snowflake Symbol (❄): This is the anti-freeze setting. The valve will open if the room temperature drops below approximately 5-7°C (41-45°F) to prevent pipes from freezing.
• Settings '1' to '5': These settings correspond to increasing room temperatures. Each number represents a different temperature range, with '1' being the lowest comfortable temperature and '5' being the highest. Adjust the dial to your desired comfort level.

Aron mapaayo ang temperatura: Simply rotate the dial on the valve head to the desired setting. The valve will automatically adjust the flow of hot water to the radiator to maintain the selected room temperature.

Biswal nga Tabang:

Hulagway: kilid view of the valve head with temperature settings.

6. Pagmentinar

Regular maintenance ensures optimal performance and longevity of your thermostatic radiator valve:

• Paglimpyo: Periodically wipe the valve head with a soft, damp panapton aron makuha ang abog ug hugaw. Ayaw gamita ang mga abrasive nga panglimpyo o mga solvent.
• Susiha ang mga Obstructions: Ensure that the valve head is not covered by curtains, furniture, or other objects that could obstruct airflow around the sensor, as this can lead to inaccurate temperature readings.
• Seasonal nga Pagsusi: Before the heating season begins, rotate the valve head through its full range of settings (from '0' to '5' and back) a few times. This helps prevent the valve pin from sticking due to prolonged inactivity.
• Proteksyon batok sa katugnaw: During periods when heating is not required, consider leaving the valve on the snowflake setting to protect your system from freezing.

7. Pagsulbad sa problema

If you encounter issues with your thermostatic radiator valve, consider the following common problems and solutions:

• Radiator Not Heating:
  • Check if the valve is set to '0' or the anti-freeze symbol. Adjust to a higher setting.
  • The valve pin might be stuck. Try removing the thermostatic head and gently pressing the pin on the valve body a few times. If it moves freely, reattach the head.
  • Ensure there is no air in the radiator. Bleed the radiator if necessary.
• Radiator Overheating or Not Regulating Temperature Correctly:
  • The valve might be set too high. Reduce the setting.
  • The sensor might be obstructed (e.g., by curtains, furniture) or exposed to direct sunlight, causing it to misread the room temperature. Ensure clear space around the valve.
  • The valve pin might be stuck in an open position. Try the seasonal check procedure mentioned in maintenance.
• Pagtulo:
  • If there is a leak at the connection point, ensure the valve head is securely tightened (but not overtightened). If the leak persists, professional assistance may be required.

Kon kini nga mga lakang dili makasulbad sa problema, palihog kontaka ang suporta sa kustomer.

8. Mga Tip sa Gumagamit

• For optimal energy saving, set the valve to a comfortable temperature and avoid frequent adjustments.
• In rooms that are rarely used, consider setting the valve to the anti-freeze symbol (❄) to prevent freezing while minimizing energy consumption.
• Ensure that the valve is not blocked by any objects to allow for accurate temperature sensing.

9. Garantiya ug Suporta

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to your purchase documentation or contact the seller directly. If you require technical assistance or have questions not covered in this manual, please reach out to the seller's customer support team.