1. Pasiuna
This manual provides essential information for the safe and effective operation of your SHEHDS LED Spider Beam Mini 9x10W RGBW 4in1 Moving Head Lighting fixture. Please read this manual thoroughly before installation and use, and keep it for future reference.
Figure 1: SHEHDS LED Spider Beam Mini 9x10W RGBW 4in1 Moving Head Lighting
2. Mga Pag-amping sa Kaluwasan
- Siguroha ang input voltage matches the specified range (AC100-240V, 50-60Hz) to prevent damage.
- Always connect the fixture to a grounded power outlet.
- Ayaw ablihi ang casing; walay user-serviceable nga mga bahin sa sulod. I-refer ang tanan nga pagserbisyo sa mga kwalipikado nga kawani.
- Avoid direct eye exposure to the light source, as it can cause eye injury.
- Keep the fixture away from water, moisture, and excessive heat.
- Siguruha nga husto ang bentilasyon sa palibot sa yunit aron malikayan ang sobrang kainit.
- Use appropriate safety cables when suspending the fixture.
3. Mga Sulod sa Pakete
Upon opening the package, verify that all items are present and in good condition:
- 1x Mini LED Beam Spider Light
- 1x Power Cord
- 1x Signal Line (DMX cable)
- 1x Manwal sa Instruksyon
- 1x Suspension Accessories (bracket)
- 2x nga mga tornilyo
Figure 2: Included accessories and packaging
4. Pag-setup
4.1 Pag-mount
The fixture can be mounted in various positions (e.g., truss, floor) using the provided suspension accessories. Ensure the mounting surface or truss is capable of supporting the fixture's weight (6KG) and that a safety cable is always used.
4.2 Mga Koneksyon
Refer to the rear panel diagram for connection points:
Figure 3: Rear panel connections and control buttons
- Koneksyon sa Gahum: Connect the power cord to the 'POWER IN' socket. Multiple devices can be daisy-chained using the 'POWER OUT' socket to connect to the 'POWER IN' of the next fixture. The power cable includes a fuse for protection.
- Koneksyon sa DMX: Use the provided signal line (DMX cable) to connect your DMX controller to the 'DMX IN' socket. For multiple fixtures, connect the 'DMX OUT' of the first fixture to the 'DMX IN' of the next, and so on.
5. Mga Instruksyon sa Pag-opera
5.1 Control Panel
The fixture features a digital display and control buttons ('MENU', 'UP', 'DOWN', 'ENTER') on the rear panel for mode selection and parameter adjustment.
5.2 DMX Control
The fixture supports 16 or 48 DMX channels. Connect a DMX controller to access advanced lighting effects and precise control over individual parameters such as dimming, function, speed, and RGBW color mixing.
Figure 4: DMX Channel Value Panel and Control Sliders
5.3 Automatic and Sound-Activated Modes
The fixture includes built-in automatic programs and a sound-activated mode. These can be selected via the control panel for standalone operation without a DMX controller.
5.4 Lighting Effects Demonstration
The video below demonstrates various lighting effects achievable with the SHEHDS LED Spider Beam Mini.
Video 1: Demonstration of various lighting patterns and color changes.
6. Pagmentinar
- Paglimpyo: Regularly clean the lenses and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Inspeksyon: Periodically check all cables, connections, and mounting hardware for signs of wear or damage. Replace any damaged components immediately.
- Pagtipig: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a protective case.
- Pagpuli sa Fuse: The power input includes a fuse. If the unit does not power on, check and replace the fuse if necessary. Ensure to use a fuse of the correct rating.
7. Pagsulbad sa problema
| Problema | Posibleng Hinungdan | Solusyon |
|---|---|---|
| Fixture does not power on | No power supply; Blown fuse; Faulty power cable | Check power connection; Replace fuse; Test/replace power cable |
| Walay kahayag nga output | Fixture in blackout mode; DMX signal issue; Internal fault | Check DMX settings/mode; Verify DMX cable and controller; Contact support |
| Incorrect DMX control | Incorrect DMX address; Incorrect DMX mode; Faulty DMX cable | Set correct DMX address; Select correct DMX channel mode (16/48); Check DMX cable connections |
| Pag-overheat sa fixture | Poor ventilation; Ambient temperature too high | Ensure adequate airflow around the unit; Operate in a cooler environment |
8. Mga detalye
| Feature | Espesipikasyon |
|---|---|
| Pagsulod Voltage | AC100-240V, 50-60Hz |
| Kinatibuk-ang Gahum | 90W |
| Tinubdan sa LED | 9x10W RGBW 4in1 LEDs (Red, Green, Blue, White and mix Color) |
| DMX Control Channels | 16/48 DMX Channels |
| Gidak-on sa Produkto | 31cm x 29cm x 15cm |
| Timbang | 6 KG |
| Mahayag nga Flux | 2000-82000 |
| Tinubdan sa Gahum | AC |
| Pamaagi sa Pag-instalar | Naglangkob sa kaugalingon |
| Sertipikasyon | CE, EAC, FCC, RoHS, UL, WEEE |
9. Mga Tip sa Gumagamit
- For optimal beam effects, use the fixture in environments with some atmospheric haze or fog.
- When daisy-chaining power, ensure the total current draw does not exceed the circuit's capacity.
- Experiment with both 16-channel and 48-channel DMX modes to find the best balance between control complexity and desired effects for your setup.
- Regularly check the fan vents for dust accumulation to maintain efficient cooling and prolong LED lifespan.
10. Garantiya ug Suporta
This product comes with a 1-year warranty from the date of purchase. For technical support, service, or warranty claims, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.
