LB350-2.4G Remote Control and LB-RX-2.4G Receiver Instruction Manual

1. Tapos sa Produktoview

This manual provides essential information for the safe and effective use of your LB350-2.4G Remote Control and LB-RX-2.4G Receiver. These components are designed to provide wireless control for children's electric ride-on vehicles, offering a stable 2.4G wireless connection and versatile voltage pagkaangay.

Hulagway 1: Labaw naview of the LB350-2.4G Remote Control and LB-RX-2.4G Receiver.

Pangunang mga bahin:

• Daghag Gamit nga Voltage Pagkaangay: Supports both 6V and 12V children's electric vehicles.
• Advanced 2.4G Wireless Technology: Ensures a stable and interference-free connection.
• Integrated Controller and Motherboard: Simplifies installation and ensures efficient performance.
• Malungtaron nga Pagtukod: Built with high-quality plastic for long-lasting use.
• Smooth Start Feature: Provides gentle acceleration and deceleration for enhanced safety and comfort.

2. Impormasyon sa Kaluwasan

• Always ensure adult supervision when children are operating electric vehicles.
• I-verify ang husto nga voltage (6V or 12V) of the vehicle before connecting the receiver. Incorrect voltage makadaot sa unit.
• Keep the remote control and receiver away from water and extreme temperatures.
• Do not attempt to modify or disassemble the components, as this may void any potential warranty and cause damage.
• This product contains chemicals, including phthalates (DEHP), known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

3. Pag-setup ug Pag-instalar

3.1 Components Identification

Hulagway 2: Ibabaw view of the Remote Control and Receiver.

Hulagway 3: Detalyado view of the LB-RX-2.4G Receiver module with labeled ports.

3.2 Pag-instalar sa Tigdawat

1. Locate the existing receiver or designated mounting area within the children's electric vehicle.
2. Carefully disconnect the vehicle's power source before proceeding with installation.
3. Connect the LB-RX-2.4G Receiver to the vehicle's wiring harness. Ensure all connections are secure and match the vehicle's original wiring configuration (e.g., motor, steering, power). Refer to the vehicle's original wiring diagram if available.
4. Mount the receiver securely within the vehicle, ensuring it is protected from moisture and physical damage.
5. Reconnect the vehicle's power source.

3.3 Pagpahilayo sa Remote Control Pairing

To pair the LB350-2.4G Remote Control with the LB-RX-2.4G Receiver:

1. Ensure the electric vehicle is powered OFF.
2. Insert batteries into the LB350-2.4G Remote Control (batteries not included).
3. Press and hold the pairing button on the remote control (if available, otherwise proceed to step 4).
4. Power ON the electric vehicle.
5. Observe the indicator lights on both the remote and receiver. A solid light typically indicates a successful pairing. If pairing fails, power off both devices and repeat the process.

4. Mga Instruksyon sa Pag-opera

4.1 Mga Kalihokan sa Remote Control

Figure 4: Close-up of the LB350-2.4G Remote Control buttons.

• Forward/Backward Arrows: Control the vehicle's direction of movement.
• Left/Right Arrows: Control the vehicle's steering.
• 'S' Button (Speed): Cycles through available speed settings (e.g., low, medium, high).
• 'P' Button (Parking/Brake): Engages the parking brake or stops the vehicle immediately.

4.2 Smooth Start Feature

The integrated smooth start feature ensures that the vehicle accelerates and decelerates gradually, preventing sudden jolts. This enhances the safety and comfort for the child operating the vehicle.

5. Pagmentinar

• Paglimpyo: Pahiran ang remote control ug receiver gamit ang uga ug humok nga panapton. Ayaw gamit ug mga kemikal nga kusog mo-gamit o mogamit ug mga panglimpyo nga hait.
• Pag-ilis sa Baterya (Remote Control): When the remote control's indicator light dims or responsiveness decreases, replace the batteries with new ones of the correct type and polarity.
• Pagtipig: Store the remote control and receiver in a cool, dry place when not in use. Remove batteries from the remote control if storing for extended periods to prevent leakage.
• Inspeksyon: Periodically check all wiring connections to the receiver for looseness or damage.

6. Pagsulbad sa problema

• Ang Salakyanan Dili Makatubag:
  • Check if the vehicle is powered on.
  • Ensure the remote control batteries are fresh and correctly inserted.
  • Sulayi pag-usab ang proseso sa pagpares (Seksyon 3.3).
  • Verify all wiring connections to the receiver are secure.
• Intermittent Control:
  • Ensure there are no strong interference sources (e.g., other 2.4G devices) nearby.
  • Check remote control battery level.
  • Ensure the remote control is within effective range of the vehicle.
• Vehicle Only Moves in One Direction:
  • Inspect motor wiring connections to the receiver.
  • Ensure the directional buttons on the remote are functioning correctly.

7. Mga detalye

Figure 5: Dimensions of the Remote Control and Receiver.

8. Mga Tip sa Gumagamit

• Always test the remote control's functionality in a safe, open area before allowing a child to use the vehicle.
• Familiarize yourself with the 'P' (Parking/Brake) button for quick stops in emergencies.
• If the vehicle has multiple speed settings, start with the lowest speed for new or younger users.
• Keep the remote control within line of sight of the vehicle for optimal signal strength.

9. Garantiya ug Suporta

For specific warranty information, please refer to the terms provided by your original seller or retailer at the time of purchase. If you encounter any issues or require technical assistance, please contact the seller directly for support.