1. Pasiuna
This manual provides essential information for the safe and effective use, maintenance, and storage of your Metabo 14.4V 1.5Ah Li-Ion battery. This battery is designed for use with compatible Metabo electric tools such as drills, bolt drivers, and angle grinders. Please read this manual thoroughly before first use and keep it for future reference.
2. Impormasyon sa Kaluwasan
Always observe the following safety precautions when handling Li-Ion batteries:
- Ayaw i-short-circuit ang mga terminal sa baterya.
- Do not expose the battery to water, moisture, or extreme temperatures.
- Do not disassemble, crush, or incinerate the battery.
- Ipahilayo ang baterya sa mga bata ug mga binuhi.
- Use only chargers specifically designed for Metabo 14.4V Li-Ion batteries.
- If the battery is damaged, leaking, or excessively hot, discontinue use immediately.
- Isalikway ang mga baterya nga responsable sumala sa lokal nga mga regulasyon.
3. Tapos sa Produktoview
The Metabo 14.4V 1.5Ah Li-Ion battery provides reliable power for your compatible Metabo cordless tools. Key features include:
- Voltage: 14.4V
- Kapasidad: 1.5Ah (1500mAh)
- Type: Li-Ion
- Mga Sertipikasyon: CE, RoHS
4. Pag-setup
4.1 Inisyal nga Pag-charge
Before first use, fully charge the battery using a compatible Metabo 14.4V Li-Ion battery charger. Refer to your charger's instruction manual for specific charging procedures. Ensure the battery is securely seated in the charger.
4.2 Pag-instalar sa Baterya
- Ensure your Metabo power tool is switched off and disconnected from any power source.
- Align the battery with the battery slot on your power tool.
- Slide the battery firmly into the tool until it clicks into place. Ensure it is securely locked to prevent accidental detachment during operation.
- To remove, press the battery release button(s) and slide the battery out.
5. Mga Instruksyon sa Pag-opera
Once the battery is fully charged and correctly installed in your compatible Metabo power tool, you can begin operation. Always follow the operating instructions provided with your specific power tool.
- Ensure the battery is fully charged for optimal performance and runtime.
- Avoid completely draining the battery, as this can reduce its lifespan.
- If the tool's performance decreases significantly, it's time to recharge the battery.
6. Pagmentinar
6.1 Pag-charge
- Charge the battery in a well-ventilated area, away from flammable materials.
- Do not charge batteries that are visibly damaged or excessively hot.
- Allow a hot battery to cool down before charging.
6.2 Pagtipig
- Ibutang ang baterya sa bugnaw, uga nga lugar, layo sa direktang kahayag sa adlaw ug grabeng temperatura.
- For long-term storage, charge the battery to approximately 50-70% capacity.
- Likayi ang pagtipig sa baterya sa hingpit nga discharged nga estado.
6.3 Paglimpyo
- Keep the battery terminals clean and free from dirt or debris. Use a dry cloth to wipe them if necessary.
- Do not use solvents or abrasive cleaners on the battery.
7. Pagsulbad sa problema
If you encounter issues with your battery, consider the following:
- Ang baterya dili nag-charge: Ensure the charger is plugged in, the battery is correctly inserted, and the battery/charger are not damaged.
- Tool not operating: Check if the battery is fully charged and securely installed in the tool. Ensure the tool itself is functioning correctly.
- Reduced runtime: This may indicate the battery is nearing the end of its lifespan or was not fully charged. Ensure proper charging and storage practices.
- Sobra nga kainit: If the battery becomes excessively hot during use or charging, discontinue use immediately and allow it to cool. If the issue persists, the battery may be faulty.
8. Mga detalye
| Feature | Espesipikasyon |
|---|---|
| Ngalan sa Brand | Metabo |
| Numero sa Modelo | D-72622 |
| Type | Li-Ion |
| Nominal nga Kapasidad | 1500mAh (1.5Ah) |
| Voltage | 14.4V |
| Gihatagan og bili nga Voltage | 14.4 V |
| Kusog | 21.6 Wh |
| Timbang | 0.3 KG |
| Aplikasyon | Electric Tool (e.g., Electric Drill, Bolt Driver, Angle Grinder) |
| Sertipikasyon | CE, RoHS |
| Sinugdanan | Mainland China |
| Petsa sa Paggama | 09/2021 (as per sample label) |
| Mga Numero sa Bahin | 25417000, 1091903954 (as per sample label) |
9. Mga Tip sa Gumagamit
- Always keep a spare charged battery on hand for extended work sessions.
- Monitor the battery's charge level indicator on your tool (if available) to avoid unexpected power loss.
- If working in cold conditions, keep batteries warm before use to maximize performance.
10. Garantiya ug Suporta
For warranty information and technical support, please refer to the documentation provided with your original Metabo power tool or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
