Antec FLUX SE MESH BTF Mid Tower Case

Pasiuna

Thank you for choosing the Antec FLUX SE MESH BTF Mid Tower Case. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new PC case. Please read this manual carefully before beginning your build to ensure proper installation and optimal performance.

Pag-setup ug Pag-instalar

Before starting, ensure you have all necessary components and tools. Always handle components with care and consider using an anti-static wrist strap.

1. Pag-andam sa Kaso

1. Kuhaa ang mga side panel: Carefully remove the tempered glass side panel and the steel side panel by unscrewing the thumbscrews at the rear of the case.
2. Access Front Panel: The front mesh panel can be detached for easier access to front fan mounts and dust filter cleaning.
3. Ilha ang mga sangkap: Familiarize yourself with the internal layout, including motherboard tray, drive bays, and fan mounts.

2. Pag-instalar sa Motherboard

1. Install the CPU, CPU cooler (if air cooler), and RAM onto your motherboard before placing it in the case.
2. Align the motherboard with the standoffs in the case. The case supports ATX, Micro-ATX, and Mini-ITX motherboards.
3. I-secure ang motherboard gamit ang gihatag nga mga screw.

3. Pag-instalar sa Power Supply Unit (PSU)

1. Mount your ATX power supply into the PSU shroud area at the bottom rear of the case.
2. I-secure ang PSU gamit ang mga screw gikan sa likod sa case.

4. Pag-instalar sa Storage Drive

• 3.5" nga mga HDD: Install 3.5" hard drives into the dedicated drive cage located under the PSU shroud.
• 2.5" nga mga SSD: Mount 2.5" SSDs to the dedicated brackets behind the motherboard tray or on top of the PSU shroud.

5. Graphics Card (GPU) Installation

1. Kuhaa ang gikinahanglan nga mga tabon sa expansion slot sa likod sa case.
2. Insert your graphics card into the PCIe slot on the motherboard and secure it with screws.

6. Fan and Radiator Installation

The case offers extensive cooling options:

• atubangan: Supports up to 3 x 120mm or 2 x 140mm fans, or radiators up to 360mm.
• Ibabaw: Supports up to 2 x 120mm or 2 x 140mm fans, or radiators up to 280mm.
• likod: Supports 1 x 120mm fan or 120mm radiator.
• PSU Shroud: Supports 2 x 120mm fans.

7. Pagdumala sa Cable

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables for improved airflow and aesthetics.

8. Connecting Front I/O

Ikonektar ang mga kable sa atubangan nga panel (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) ngadto sa katugbang nga mga header sa imong motherboard. Tan-awa ang manwal sa imong motherboard para sa eksaktong mga pin layout.

Operating Your PC Case

Once all components are installed and cables are connected, replace the side panels. Power on your system using the power button on the front I/O panel. The mesh design ensures optimal airflow for cooling your components.

Front I/O Ports:

• Power Button: To turn the system on/off.
• I-reset ang Butang: Aron i-restart ang sistema.
• USB 3.0 Ports: For high-speed data transfer.
• USB 2.0 nga Port: For standard USB devices.
• Mga HD Audio Jack: For headphones and microphone.

Pagmentinar

Ang regular nga pagmentinar makatabang sa pagsiguro sa labing maayo nga performance ug taas nga kinabuhi sa mga component sa imong PC.

• Mga Filter sa Abog: The case features removable dust filters on the front, top, and bottom (PSU intake). Regularly remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Paghinlo sa sulud: Periodically use compressed air to clear dust from internal components and fans. Ensure the system is powered off and unplugged before cleaning.
• Panglimpyo sa gawas: Pahiran ang mga panggawas nga bahin sa humok, damp panapton. Likayi ang mga mapintas nga kemikal nga makadaot sa pagkahuman.

Pag-troubleshoot

Kon makasugat ka og mga problema, hunahunaa ang mosunod nga komon nga mga lakang sa pag-troubleshoot:

• Walay Gahum: Ensure the PSU is switched on, all power cables (24-pin, 8-pin CPU, GPU PCIe) are securely connected, and the front panel power switch cable is correctly attached to the motherboard.
• Fans Not Spinning: Check fan connections to the motherboard or fan controller. Ensure sufficient power is supplied.
• Front I/O Not Working: Verify that all front panel cables (USB, Audio) are correctly connected to the motherboard headers.
• Sobra nga kainit: Ensure proper fan configuration (intake/exhaust), clean dust filters, and check CPU cooler/GPU heatsink mounting.

Mga detalye

The Antec FLUX SE MESH BTF Mid Tower Case offers robust features for PC builders:

Garantiya ug Suporta

For warranty information and technical support, please refer to the official Antec website o kontaka ang imong retailer. Itago ang imong pruweba sa pagpalit para sa mga pag-angkon sa warranty.

Mga Tip sa Gumagamit

• Pagdumala sa Kable: Take your time with cable management. A tidy interior not only looks better but also improves airflow and makes future upgrades easier.
• Oryentasyon sa Fan: Ensure your fans are oriented correctly for optimal airflow. Typically, front and bottom fans should be intake, while rear and top fans should be exhaust.
• Paglimpyo sa Abog Filter: Make cleaning dust filters a routine task (e.g., once a month) to maintain good airflow and prevent dust buildup inside your PC.
• Component Compatibility: Always double-check the dimensions of your CPU cooler, GPU, and PSU against the case's maximum clearance specifications before purchasing.