Universal T12 / 30907

Digital Clock Car Tire Pressure Monitoring System (TPMS)

Model: T12 / 30907

This manual provides detailed instructions for the installation, operation, and maintenance of your new TPMS. Please read thoroughly before use.

1. Tapos sa Produktoview

The Digital Clock Car Tire Pressure Monitoring System (TPMS) is designed to enhance driving safety by providing real-time monitoring of your vehicle's tire pressure and temperature. It features a colorful LCD digital display, solar and USB charging capabilities, and intelligent alarm functions for abnormal tire conditions.

TPMS display unit and four external sensors
Figure 1.1: TPMS Display Unit and External Sensors
Key features of the TPMS including solar power, temperature detection, and easy installation
Figure 1.2: Key Features - Check tire pressure, detect temperature, prevent puncture, solar powered, 360° rotation, sensor waterproof, four-wheel display, easy to install.

1.1 Mga sulod sa Pakete

Sa dili pa i-install, palihug siguroha nga ang tanan nga mga sangkap anaa:

Contents of the TPMS package including display, sensors, USB cable, wrench, and anti-theft nuts
Figure 1.3: Package Contents - TPMS display unit, 4 external sensors, USB charging cable, wrench, anti-theft nuts, silicone pad, user manual.
  • TPMS Display Unit
  • 4 External nga mga Sensor
  • USB Charging Cable
  • Wrench
  • Anti-theft Nuts
  • Silicone Pad
  • Manwal sa Gumagamit

2. Pag-setup ug Pag-instalar

2.1 Display Unit Placement and Charging

Place the TPMS display unit on your dashboard in a position that does not obstruct your view of the road. The unit is designed for solar charging but can also be charged via USB.

Solar and USB dual charging methods for the TPMS display unit
Figure 2.1: Solar and USB Dual Charging Methods
  • **Solar Charging:** Ensure the solar panel on the display unit is exposed to sunlight for continuous charging.
  • **USB Charging:** Connect the provided USB cable to the display unit and a car charger or USB port for charging, especially in low light conditions.

2.2 External Sensor Installation

The system uses external sensors for easy installation. Follow these steps to install the sensors on your tires:

Step-by-step guide for installing external tire pressure sensors
Figure 2.2: External Sensor Installation Steps
  1. Screw out the original valve cap from the tire valve.
  2. Install an anti-theft washer onto the valve stem first.
  3. Rotate the anti-theft nut counterclockwise onto the valve stem.
  4. Screw the external sensor onto the valve stem. Ensure it is tightened securely.
  5. Use the provided wrench to tighten the anti-theft washer by turning it anticlockwise against the sensor.
  6. Check for air leakage around the sensor using soapy water.

The system features an intelligent shock boot, meaning it will automatically turn on when the car is moving, so there is no need to manually power it on or off.

3. Mga Instruksyon sa Pag-opera

3.1 Display Unit Functions

The colorful LCD digital display provides clear, real-time information about your tires. The display unit includes buttons for selection and power/up functions.

Labeled diagram of the TPMS display unit showing solar charging, buttons, and data fields
Figure 3.1: Display Unit Features - Solar charging, selection buttons, electricity level, current tire temperature, current tire pressure, USB charging port, solar panels.
Real-time monitoring display showing tire pressure and temperature for all four tires
Figure 3.2: Real-time Monitoring - LCD display shows 4 tires' pressure and temperature.
  • **Real-time Monitoring:** The display shows the pressure and temperature for all four tires simultaneously.
  • **Digital Clock Display:** The unit also features a digital clock.
  • **Unit Change:** You can switch between PSI and Bar for pressure readings, and between °C and °F for temperature readings. Refer to the on-screen menu for this setting.

3.2 Mga Kalihokan sa Alarm

The system provides various alarms to alert you to abnormal tire conditions, ensuring driving safety.

Diagram illustrating different alarm types: leak/low pressure, high pressure, high temperature, and low battery
Figure 3.3: Alarm Types and Indicators
  • **Leak/Low Pressure Alarm:** The icon flashes, and the corresponding tire's pressure value flashes.
  • **High Pressure Alarm:** The icon flashes, and the corresponding tire's pressure value flashes.
  • **High Temperature Alarm:** The icon flashes, and the corresponding tire's temperature value flashes.
  • **Sensor Battery Run Down:** The icon blinks, and the low battery icon blinks for the affected sensor.
  • **Buzzer Alarm:** An audible "di! di! di!" sound accompanies visual alarms.

3.3 High Temperature Protection

The system is equipped with automatic high temperature protection:

High temperature protection features: charging stops at 65°C, self-protection at 85°C, USB ventilation
Figure 3.4: High Temperature Protection
  • Above 65°C: Charging will stop.
  • Above 85°C: Self-protection mode turns on.
  • If temperature is too high, ventilate or turn on the air conditioner to return to normal monitoring.

4. Pagmentinar

4.1 Kinatibuk-ang Pag-atiman

  • Clean the display unit and sensors regularly with a soft, dry cloth. Avoid using harsh chemicals.
  • Ensure the solar panel on the display unit is clean for efficient charging.
  • The brass valve core of the sensors is resistant to harsh environments, and the sensors are IPX7 waterproof, providing durability against various weather conditions.
Brass valve core resistant to harsh environments
Figure 4.1: Brass Valve Core for Enhanced Durability
IP67 waterproof sensors being sprayed with water
Figure 4.2: IP67 Waterproof Grade Sensors

4.2 External Sensor Battery Replacement

When a sensor battery runs low, it will trigger an alarm. Replace the battery by following these steps:

Diagram showing steps to replace the battery in an external sensor
Figure 4.3: External Sensor Battery Replacement Diagram
  1. Loosen the six-angle nuts on the sensor.
  2. Spin out the sensor from the valve stem.
  3. Remove the dismantling gasket.
  4. Use the wrench to rotate the sensor counterclockwise to open it.
  5. Ilisan ug bag-ong CR1632 nga baterya.
  6. Reassemble the sensor and reinstall it on the tire, following the installation steps in Section 2.2.

5. Pagsulbad sa problema

If you encounter any issues with your TPMS, refer to the following common problems and solutions:

Problema Posibleng Hinungdan Solusyon
Ang display wala mag-on Low battery, insufficient solar charging, unit not detecting movement. Charge via USB. Ensure solar panel is exposed to light. Drive the car to activate intelligent shock boot.
Inaccurate readings or no signal from a sensor Sensor not installed correctly, sensor battery low, interference. Reinstall sensor securely. Replace sensor battery (see Section 4.2). Ensure no strong electronic interference nearby.
Alarm constantly sounding Tire pressure/temperature outside normal range, sensor malfunction. Check tire pressure with a reliable gauge and adjust if necessary. Check tire temperature. If problem persists, contact support.
Nawala nga mga accessories Sayop sa pagputos. Contact the purchase channel for replacement shipment.

6. Mga detalye

Feature Detalye
Numero sa Modelo 30907
Materyal ABS + PC + Aluminum
Type sa Screen Colorful LCD Digital Display
Type sa Sensor 4 External nga mga Sensor
Ipakita ang Tinubdan sa Gahum Solar powered, USB cable powered
Frequency sa Pagtrabaho 433.9200MHz ± 0.1Mhz
Nagtrabaho nga Voltage 3.7-5V
Kasamtangang Pagtrabaho ≤6mA
USB Charging Current ≤250mA
Temperature Monitoring Range -40 ℃ ~ + 130 ℃
Sakup sa Pag-monitor sa Presyon 0-3.5bar
Katukma Temperature ±2℃; Pressure ±0.1bar
Product Dimensions (Display) 10.20cm (L) x 5.20cm (W) x 3.10cm (H)
Timbang sa Pakete 0.212 kg
Sinugdanan Mainland China

7. Mga Tip sa Gumagamit

  • **Solar Panel Orientation:** For optimal solar charging, ensure the display unit's solar panel is facing upwards and exposed to direct sunlight as much as possible.
  • **Automatic Operation:** The system is designed to automatically activate when your vehicle starts moving, eliminating the need for manual power cycling.
  • **Sensor Type:** This system comes with external sensors, which are generally easier to install and replace compared to internal sensors.
  • **Regular Checks:** Even with the TPMS, it's good practice to manually check your tire pressure periodically with a reliable gauge.

8. Garantiya ug Suporta

For any malfunctions, missing accessories, or other product-related inquiries, please contact the after-sales service or the original purchase channel. Do not attempt to disassemble components arbitrarily, as this may void your warranty.

A comprehensive user manual in PDF format is available for download and further details:

View Manwal sa Gumagamit (PDF)

9. Mga Pasidaan ug Impormasyon sa Kaluwasan

  • Ayaw gamita sa damp palibot.
  • Susiha ang produkto alang sa kadaot sa dili pa gamiton.
  • Ipahilayo sa mga bata.
  • Avoid overloading the system.
  • Do not disassemble components arbitrarily.

May Kalabutan nga mga Dokumento - T12 / 30907

Si Preview Motorcycle Handlebar Switch Installation Guide & Safety Warnings
Provides essential safety warnings and step-by-step installation instructions for a universal motorcycle handlebar switch, covering positioning, wiring, and cable management.
Si Preview Universal L27130 10L LPC CI Pressure Cooker - Teknikal nga mga Espisipikasyon ug Manwal
Detalyado nga teknikal nga mga detalye, mga instruksyon sa paggamit, ug impormasyon sa garantiya para sa Universal L27130 10L LPC CI pressure cooker. Naglakip sa mga dimensyon, gibug-aton, mga EAN code, ug mga giya sa kaluwasan.
Si Preview Universal LED Bathroom Mirror Type U - Assembly and User Manual
Detailed assembly and user instructions for the Universal LED Bathroom Mirror (Type U), featuring adjustable color temperatures, anti-fog, dimming, and digital clock. Includes safety guidelines, wiring diagrams, and installation steps.
Si Preview Manual de Instrucciones: Olla a Presión Universal Ultra Cierre Externo
Guía completa para el uso seguro y eficiente de la Olla a Presión Universal Ultra Cierre Externo. Incluye instrucciones, precauciones de seguridad, mantenimiento y detalles de la garantía de 25 años.
Si Preview Universal English Product Manual for Small Home Decor Ornaments
Comprehensive product manual for Universal Small Home Decor Ornaments, detailing product overview, material description, features, usage and placement instructions, cleaning and maintenance methods, and important warm reminders.
Si Preview Universal A/C Remote Control User Manual - Setup and Operation
Comprehensive user manual for the Universal A/C Remote Control, detailing setup methods (Brand Button, Automatic Search, Brand Code), factory reset, and operation of functions like Fast Cooling/Heating, Clock, and Timer. Includes a summary of the extensive brand code list for compatibility.