1. Pasiuna
The Beok Tuya Wifi Smart Thermostat is an intelligent temperature controller designed for gas-fired wall-hung boilers and heat pump systems. It regulates room temperature for comfort and energy savings by comparing the ambient temperature with your set temperature. This thermostat supports both battery and USB power options and can be controlled via the Tuya Smart/Smart Life app, as well as voice assistants like Alexa and Google Home.
2. Mga Sulod sa Pakete
Palihug tsek ang kahon para sa mosunod nga mga butang:
- Thermostat Unit
- USB-C Cable
- 2x Mounting Screw
- Manwal sa Gumagamit
3. Mga detalye
| Feature | Espesipikasyon |
|---|---|
| Ngalan sa Brand | Beok |
| Modelo | BOT-R8W-WIFI (BOT-R5W) |
| Suplay sa kuryente | 3 x 1.5V AAA alkaline nga mga baterya o USB-C |
| Ang-ang sa Proteksyon | IP20 |
| Temperatura nga Sensor | Ang NTC |
| Katukma sa Temperatura | ± 0.5°C (mapasibo) |
| Sakup sa Pagtakda sa Temperatura | 5~60 ℃ |
| Switch Deviation (Hysteresis) | 0.5~10℃ (Factory setting: 0.5℃) |
| Load Current | 3A (resibo) |
| Gahum sa kaugalingon nga konsumo | Less than 170 μΑ |
| Pagkakakonektar sa WIFI | 2.4G |
| Sertipikasyon | CE |
4. Pag-setup ug Pag-instalar
4.1 Mga Opsyon sa Suplay sa Gahum
- Gahum sa Baterya: Uses 3x AAA batteries (not included). To save battery, the screen will dim and turn off after 5 seconds.
- USB-C nga Gahum: A USB port on the side allows for hassle-free wall mounting. With USB-C charging, the screen can remain always on. You can set vibration wake times in the app.
4.2 Wiring Diagram
Importante: Due to the strong power design of some circuits, installation should be performed by qualified professionals. Most boilers are connected to COM and NO terminals, while a few are connected to COM and NC.
4.3 Mga Lakang sa Pag-instalar
- Carefully pry away the display panel using a screwdriver.
- Place the backplate in the desired installation position on the wall. Mark the screw holes.
- Drill holes, insert expansion anchors (if needed), and secure the backplate with the provided screws. Ensure the backplate is firmly attached.
- Connect the wiring to the appropriate terminals (NO, COM, NC) on the backplate as per the wiring diagram for your heating system.
- Carefully align the display panel with the backplate and snap it into place. The installation is complete.
5. Mga Instruksyon sa Pag-opera
5.1 Basic Button Functions
- Power ON/OFF Key (⑁): Press once to power on. Press again to power off and close all valves.
- Mode Conversion Key (M): Press M to switch between working modes when powered on. The LCD shows Ⓜ for manual mode and Ⓐ for automatic mode.
- Adjustment Keys (▲ / ▼): Press ▲ or ▼ to adjust the set temperature and other parameters when powered on.
5.2 Advanced Device Option Settings
- When the device is on, click ▲ and ▼ to adjust the set temperature directly. If it's in automatic mode, it will switch to temporary mode.
- Power on the device and click the M button to toggle between manual and automatic modes.
- While the device is powered on, long-press the M button to enter the setting state. There are four setting states. Click ▲ and ▼ to select up and down, and short-press M to confirm after selection.
5.3 Heating and Cooling Modes
- Koneksyon sa Boiler: When the thermostat is connected to a gas boiler, it can only operate in heating mode.
- Heat Pump Connection: When the thermostat is connected to an Air Source Heat Pump (ASHP), both heating and cooling modes can be selected.
- To switch between heating/cooling settings: Short-press M to enter adjustment, then short-press ▲ and ▼ to switch.
5.4 Adlaw-adlaw nga Programa
You can set the temperature for 6 time periods every day, and these settings can be copied across days.
- In daily programming mode, short press M to select and adjust Monday-Sunday data.
- Then short-press ▲ and ▼ to adjust the 6 daily programming points (time and temperature).
5.5 Clock Adjustment
- Short-press M to enter time and date adjustment.
- Short-press M to switch options (e.g., hour, minute, day).
- Use ▲ or ▼ to adjust the values.
5.6 Ubang mga Kalihokan
- Kandado sa Bata Function: When powered on, long-press ▲ and ▼ for 5 seconds. Once a lock icon appears on the right of the display, the keys are locked to prevent accidental changes.
- Proteksyon sa Frost: This function is only valid in heating mode and helps prevent pipes from freezing by maintaining a minimum temperature (e.g., 5°C).
- Temperatura Hysteresis: The minimum adjustable temperature hysteresis is ±0.5°C, which defines the temperature range around the setpoint before the heating/cooling system activates or deactivates.
6. App and Voice Control
6.1 App Remote Control
The thermostat is compatible with the Tuya Smart or Smart Life applications, allowing you to control your heating/cooling system remotely.
6.2 Device Network Connection Settings
- Ensure the thermostat transmitting panel is on.
- Long-press the ▲ key for 5 seconds until the Wi-Fi icon on its display blinks slowly. The thermostat is now in connection mode.
- Ablihi ang Tuya Smart/Smart Life app sa imong smartphone.
- In the small-appliance list within the app, find the (Bluetooth + Wi-Fi) thermostat.
- Under the specified setup, click "Confirm".
- Choose your 2.4GHz Wi-Fi network and enter its password. Click "Next".
- Follow the prompts to click "Go to Connect", click the indicated content (usually to connect to the device's temporary Wi-Fi hotspot), and then return to the Tuya app to complete the network setup.
6.3 Pagkontrol sa Tingog
The thermostat supports voice control through popular assistants such as Alexa, Google Home, and Yandex Alice. Once connected to your smart home ecosystem, you can use voice commands to adjust settings, for example: "Set the living room to 23 °C."
7. Pagmentinar
- Keep the thermostat clean by wiping it with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the thermostat is not exposed to direct sunlight, drafts, or heat sources, as this can affect temperature readings.
- If using battery power, replace batteries promptly when the low battery indicator appears to ensure continuous operation.
8. Pagsulbad sa problema
| Phenomenon | Pamaagi sa Pagtambal |
|---|---|
| Cannot turn on the thermostat |
|
| LCD shows garbled code | Check if the rear shell installation is deformed. If so, loosen and reinstall it. |
| Display is normal but no output (heating/cooling not activating) |
|
| Error in temperature display | Calibrate the temperature display through the first calibration panel in the advanced options settings. |
9. Mga Tip sa Gumagamit
- This thermostat is designed to accurately measure and control the temperature of the room where it is installed. Ensure it is placed in a central location away from direct heat sources or drafts for optimal performance.
- For battery-powered operation, consider using high-quality alkaline batteries for longer life.
- When setting up daily programming, remember that settings can be copied, which saves time if your schedule is similar across multiple days.
10. Garantiya ug Suporta
Para sa impormasyon sa garantiya ug teknikal nga suporta, palihog tan-awa ang opisyal nga Beok website o kontaka ang imong retailer. Itago ang imong pruweba sa pagpalit alang sa bisan unsang pag-angkon sa warranty.
Usa ka PDF nga bersyon sa manwal sa paggamit anaa alang sa pag-download: I-download ang User Manual (PDF)
