Manwal sa Gumagamit sa AtomStack Swift nga F03-0329-0AA1

AtomStack F03-0329-0AA1 Swift

Mga detalye

• Ngalan sa Produkto: AtomStack Swift
• Numero sa Modelo: F03-0329-0AA1
• Bersyon: B
• Gahum nga Input: DC 24V
• Mga pantalan: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
• Status Indicator: Solid blue when working

Mga Instruksyon sa Paggamit sa Produkto

Listahan sa mga bahin:

• X-axis nga asembliya
• Left Y-axis assembly (with motor)
• Right Y-axis assembly
• Power adapter
• Llave fija (Fixed wrench)

Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.

How to Install Swift:

1. Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
2. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
3. If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.

Listahan sa mga bahin

Getting to Know AtomStack Swift

How to install Swift

1. Place the five assemblies as shown in the diagram.
   Mubo nga sulat: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left.
2. Align and connect the five assemblies, then secure them using six M5×8 screws.
3. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
   (Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
4. Install the laser module and tighten the thumb knob.Mubo nga sulat:
   If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
5. Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.

Pamaagi sa pag-focus:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.

Tip:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.

• If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
• Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
• Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.

ATOMSTACK Official Recommended Software

Mobile App Download Method：

Pamaagi sa Pag-download sa Computer Software:
Link sa pag-download sa AtomStack Studio: https://atomstack.com/pages/atomstack-studio-software

1. Official Download Link
   https://atomstack.com/pages/atomstack-studio-software
2. I-scan aron ma-download

Mga Kapanguhaan sa Software

LightBurn
Unofficial software. Requires a separate purchase

Pamaagi sa Pag-download sa Lightburn Software: Link sa pag-download: https://lightburnsoftware.com/pages/download-trial

1. Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
2. Ablihi ang software sa LightBurn, pilia ang: Mga Device - Import
3. Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
   The machine will beep once to confirm the connection.

Mubo nga sulat: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800

Giya sa Gumagamit

Kontaka Kami

Scan the QR code for more information:

• Unboxing & First Use
• Use with the AtomStack APP
• Pag-troubleshoot
• Pagmentinar

Serbisyo sa kustomer:

• For the detailed warranty policy, please visit our official website: www.atomstack.com
• Alang sa teknikal nga suporta ug serbisyo, palihug email: support@atomstack.com

Manufacturer:
Ang Shenzhen AtomStack Technologies Co., Ltd.

Zip code: 518172

adres:
17th Floor, Building 3A, Phase II, Intelligent Park, No. 76, Baohe Avenue, Baolong Street, Longgang District, Shenzhen, Guangdong, China.

Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.

FAQ