DELL Command Configure Software User Manual

Mga nota, pasidaan, ug mga pasidaan

NOTA: Ang usa ka NOTA nagpakita sa importante nga impormasyon nga makatabang kanimo sa paggamit sa imong produkto.

PAGHINUMDOM: Ang usa ka PAGHINUMDOM nagpaila sa bisan unsang potensyal nga kadaot sa hardware o pagkawala sa datos ug gisulti kanimo kung unsaon paglikay sa problema.

WARNING: Ang usa ka WARNING nagpaila sa potensyal sa kadaot sa kabtangan, personal nga kadaot, o kamatayon.

© 2025 Dell Inc. o mga subsidiary niini. Tanang katungod gigahin. Ang Dell Technologies, Dell, ug uban pang mga marka sa pamatigayon mga tatak sa Dell Inc. o mga subsidiary niini. Ang ubang mga marka sa pamatigayon mahimong mga marka sa pamatigayon sa ilang tagsa-tagsa ka tag-iya.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

NOTA: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• Dell Command | I-configure ang 4.10.1 o sa ulahi makamugna og 64-bit SCE nga adunay mga limitasyon.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

Mga topiko:

• Bersyon
• Gituyo nga mamiminaw
• Katuyoan sa dokumento

Bersyon

Kini nga kapitulo naghatag usa ka pagtaposview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Windows 11
• Windows 10
• Windows Preinstallation Environment (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

Talaan 1. Version matrix

NOTA: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

Gituyo nga mamiminaw

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

Katuyoan sa dokumento

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Pag-access sa Dell Command | I-configure ang installer

Ang Dell Command | I-configure ang pag-instalar file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. Adto sa Suporta | Dell.
2. Ubos Unsang produkto ang among matabang kanimo, isulod ang Serbisyo Tag sa imong gisuportahan nga Dell device ug i-klik Isumite, o i-klik Pangitaa ang personal nga kompyuter.
3. Sa panid sa Suporta sa Produkto para sa imong Dell device, i-klik Mga Driver ug Pag-download.
4. Pag-klik Manwal pagpangita sa usa ka piho nga drayber para nimo [model].
5. Susiha Pagdumala sa System checkbox sa ilalum Kategorya drop-down.
6. Pangitaa Dell Command | I-configure in list and select Pag-download sa tuo nga bahin sa panid.
7. Pangitaa ang na-download file sa imong kompyuter (sa Google Chrome, ang file makita sa ubos sa bintana sa Chrome), ug ipadagan ang executable file.
8. Sunda ang mga instruksyon sa screen.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

Mga topiko:

• Gisuportahan nga mga operating system alang sa Windows
  
• Gisuportahan nga mga plataporma
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Gisuportahan nga mga operating system alang sa Windows

Talaan 2. Gisuportahan nga mga operating system

Gisuportahan nga mga plataporma

Table 3. Supported platforms

Table 3. Supported platforms (continued)

NOTA: Platforms must support WMI-ACPI BIOS for full functionality.

NOTA: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

NOTA: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

NOTA: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

Mga kinahanglanon

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

NOTA:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET Framework 4.8 or later version from the I-on o i-off ang mga feature sa Windows screen.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. Doble-klik ang na-download nga DUP, i-klik ang Oo, ug dayon i-klik ang INSTALL.
   Ang Dell Command | I-configure ang wizard sa pag-install gipakita.
2. Pagdalagan ang installation wizard.
   Para sa dugang nga impormasyon, tan-awa ang Pagpadagan sa installation wizard.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. Pagdalagan ang mosunod nga sugo:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. Doble-klik ang na-download nga Dell Update Package (DUP), ug i-klik ang Oo.
2. I-klik ang EXTRACT.
   Ang Browse For Folder nga bintana gipakita.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. Sa view ang gikuha files, pag-klik View Folder.
   Ang folder naglangkob sa mosunod files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. Aron ma-access ang Dell Command | I-configure ang wizard sa pag-install, i-double click ang Command_Configure.msi.
6. Pagdalagan ang installation wizard.
   Para sa dugang nga impormasyon, tan-awa ang Pagpadagan sa installation wizard.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

Pagdagan sa wizard sa pag-install

To run the installation wizard for installing the Dell Command | Configure .msi file on your device:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   Gipakita ang wizard sa pag-install.
3.  I-klik ang Sunod.
   Ang screen sa Kasabutan sa Lisensya gipakita.
4. Basaha ang kasabutan sa lisensya ug i-klik Gidawat ko ang mga termino sa kasabutan sa lisensya, ug dayon i-klik ang Sunod.
   Gipakita ang screen sa Impormasyon sa Kustomer.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   Gipakita ang custom setup screen.
6. I-klik ang Sunod aron i-install ang Dell Command | I-configure ang CLI ug GUI sa default nga direktoryo. Ang default nga Dell Command | I-configure ang mga direktoryo sa pag-install mao ang:
   ● For 32-bit systems, C:\Program Files\Dell\Command I-configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command I-configure.
   Ang Ready to Install the Program screen gipakita.
7. I-klik ang Oo.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. I-klik ang Tapos.
   Kung ang Dell Command | Ang pag-configure sa GUI malampuson nga na-install, ang shortcut alang sa GUI gipakita sa desktop.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

NOTA: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

NOTA: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Lakaw ngadto sa folder diin ang Dell Command | Ang pag-configure sa installer gikuha gikan sa Dell Update Package (DUP).
2. Open Command Prompt as administrator.
3. Pagdalagan ang mosunod nga sugo: msiexec.exe /i Command_Configure.msi /qn
   Ang Dell Command | Ang mga sangkap sa pag-configure hilom nga na-install sa mosunod nga mga lokasyon:
   ● For 32-bit systems, C:\Program Files\Dell\Command I-configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command I-configure.

Pag-instalar sa gisuportahan nga mga pinulongan

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 — Intsik nga Taiwan
• 1031 — Aleman
• 1033 — Ingles
• 1034 — Kinatsila
• 1036 — Pranses
• 1040 — Italyano
• 1041 — Hapon
• 1043 — Dutch
• 2052 — Gipasimple nga Intsik
• 3076 — Intsik nga Hongkong

NOTA: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. Ablihi ang Control Panel.
2. Adto sa Mga Programa > Mga Programa ug Mga Feature.
3. Find Dell Command | Configure sa listahan.
4. Right-click it and select I-uninstall.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

NOTA: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

NOTA: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

NOTA: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

NOTA: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

Buhata ang mosunod nga mga lakang sa pag-upgrade sa Dell Command | I-configure (kanhi Dell Client Configuration Toolkit) sa sunod nga bersyon:

1. Double-click the downloaded DUP, and then click INSTALL.
   Ang Dell Command | I-configure ang wizard sa pag-install gilunsad.
2. Pagdalagan ang wizard sa pag-install, ug sunda ang mga panudlo nga gipakita sa screen.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. I-download ang pinakabag-o nga instalasyon file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the file, ug dayon padagana ang mosunod nga sugo:
   msiexec.exe /i Command_Configure.msi REINSTALL=TANANG REINSTALLMODE=VOMUS
   NOTA: Ang instalasyon wizard screen gipakita nga gisundan sa "Usa ka karaan nga bersyon sa Dell Command | Ang pag-configure nakit-an sa kini nga sistema. Kung magpadayon ka, tangtangon sa installer ang daan nga bersyon ug ipadayon ang pag-install sa labing bag-ong bersyon. Kung imong kanselahon ang pag-instalar sa pinakabag-o nga bersyon, ang sistema dili ibalik sa miaging bersyon sa Dell Command | I-configure. Gusto ba nimong magpadayon?” mensahe.
3. Sunda ang mga instruksyon sa screen aron mag-upgrade.
   NOTA: Para sa hilom nga pag-upgrade, padagana ang mosunod nga sugo: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

Pag-upgrade sa default folder

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Pag-browse sa folder diin imong gikuha ang Dell Command | I-configure ang installer gikan sa Dell Update Package (DUP).
2. Pagdalagan ang mosunod nga sugo: msiexec.exe /i Command_Configure.msi /qn
   Ang Dell Command | Ang mga sangkap sa pag-configure hilom nga na-install sa mosunod nga mga lokasyon:
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Command I-configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command I-configure.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

Mga topiko:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

Talaan 4. Gisuportahan nga mga operating system

Supported Platforms for Linux

Table 5. Supported platforms

NOTA: Platforms must support WMI-ACPI BIOS for full functionality.

NOTA: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

NOTA:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. NOTA:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
Ang default nga agianan sa pag-install mao ang /opt/dell/dcc.

Mga kinahanglanon

• Ang workstation kinahanglan nga nagdagan sa usa ka gisuportahan nga operating system sa Linux.
• I-download ang openSSL 1.x nga mga librarya aron i-install ug ipadagan ang Dell Command | I-configure sa Red Hat Enterprise Linux 8 ug Ubuntu Desktop 20.04.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. gikan sa dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Untar ang file gamit ang mosunod nga sugo:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Untar ang file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   Bersyon>_ Ang .tar.gz naglangkob sa mosunod nga mga pakete nga kinahanglang i-install sa mosunod nga han-ay:
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   NOTA: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f instalar
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   Ang default nga agianan sa pag-install mao ang /opt/dell/dcc.
   NOTA: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f instalar

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

NOTA: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

Aron ma-uninstall ang Dell Command | I-configure ang mga sistema nga nagpadagan sa Red Hat Enterprise Linux 8 o 9, padagana ang mga sugo sa mosunod nga han-ay:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

NOTA: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. Aron ma-uninstall ang Dell Command | I-configure ug tangtangon ang configuration files ug temporaryo files, run the following command: dpkg –purge command-configure
2. Para i-uninstall ang Hapi ug tangtangon ang configuration files ug temporaryo files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. I-upgrade ang bersyon sa Dell Command | I-configure sa sistema.

NOTA: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files ug mga folder sa sistema. Ang files ug mga folder walay bisan unsa nga functional nga epekto.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Untar ang file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh –nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Untar ang file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. Aron mag-upgrade, pagdagan ang mosunud nga mando:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. Aron mapamatud-an ang kasamtangan nga Dell Command | I-configure ang bersyon, adto sa default nga agianan sa pag-install ug pagdagan:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

Kini nga kapitulo naghatag usa ka pagtaposview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

Mga topiko:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

NOTA: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

Mga kinahanglanon

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server mga payload.

Siguroha nga ang mosunod nga mga kinahanglanon matuman:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   Gipakita ang wizard sa pag-install.
2. Select the Dell Command Secure Bios Configuration Server option.
3. I-klik ang Sunod.
4. I-klik ang Install aron masugdan ang pag-instalar.
   The installation completion wizard is displayed.
5. I-klik ang Finish aron makompleto ang instalasyon.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   NOTA: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file sa URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   NOTA: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file uban sa mosunod:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   “Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   NOTA: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   NOTA: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

NOTA: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Paghimo og bootable image preinstallation environment gamit ang Windows PE 10.0 ug 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. Gikan sa Microsoft website, i-download ug i-install ang Windows ADK sa sistema sa kliyente.
   NOTA: Samtang nag-instalar pilia lang Mga Gamit sa Pag-deploy and Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. I-install ang Dell Command | I-configure.
4. I-integrate ang Dell Command | I-configure ang istruktura sa direktoryo sa usa ka ISO file aron makahimo usa ka bootable nga imahe sa ISO.

Paghiusa sa Dell Command | I-configure ang istruktura sa direktoryo sa usa ka ISO file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. I-install ang Windows 11 operating system.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86_64.
2. Ablihi ang command prompt nga adunay mga pribilehiyo sa tagdumala.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   NOTA: Siguroha nga ang dalan nga gigamit sa sugo mao ang sa Dell Command | I-configure ang folder.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

Mga kapanguhaan ug suporta

Mahimo nimong ma-access ang gikinahanglan nga mga dokumento pinaagi sa pagpili sa imong produkto.

1. Adto sa Suporta | Dell.
2. Pag-klik Pag-browse sa tanan nga mga produkto.
3. Pag-klik Software & Solutions.
4. Pag-klik Pagdumala sa Sistema sa Kliyente.
5. Pag-klik Dell Command | Configure.
6. Pag-klik Select This Product.
7. Sa view ang gikinahanglan nga mga dokumento, i-klik ang gikinahanglan nga ngalan sa produkto ug numero sa bersyon.

NOTA: Kung wala kay aktibong koneksyon sa Internet, makit-an nimo ang impormasyon sa pagkontak bahin sa imong invoice sa pagpalit, packing slip, bill, o katalogo sa produkto sa Dell.

Naghatag ang Dell og daghang online ug nakabase sa telepono nga suporta ug mga kapilian sa serbisyo. Ang pagkaanaa magkalainlain sa nasud o rehiyon ug produkto, ug ang ubang mga serbisyo mahimong dili magamit sa imong lugar. Aron makontak ang Dell alang sa mga baligya, teknikal nga suporta, o mga isyu sa serbisyo sa kustomer:

1. Adto sa Suporta | Dell.
2. Pilia ang imong kategorya sa suporta.
3. Susihon ang imong nasud o rehiyon sa Pagpili usa ka Nasud / Rehiyon drop-down list sa ubus sa panid.
4. Pilia ang angay nga serbisyo o link sa suporta base sa imong panginahanglan.

Mga Dokumento / Mga Kapanguhaan

DELL Command Configure Software [pdf] Manwal sa Gumagamit Command Configure Software, Configure Software, Software

Mga pakisayran

• Manwal sa Gumagamit