Itron ACT2 Meter Module

Mga detalye
- Ngalan sa Produkto: ACT2 Meter Module
- Epektibo nga Petsa: Hunyo, 2018
- Kadaghanon Range: 902.4 MHz hangtod 927.6 MHz
- Transmitter: 902.4 MHz hangtod 927.6 MHz
- Pagkadugtong: Wi-Fi
- Voltage: AC ug DC
Nagkalainlain
Ang manwal sa tiggamit alang sa bisan unsang produkto nga adunay sulod niini nga module maglangkob sa mosunod nga teksto:
Propesyonal nga Pag-instalar
Kini nga module gituyo alang sa propesyonal nga pag-instalar sa integrator. Ang OEM integrator mao gihapon ang responsable sa FCC compliance requirement sa end product, nga nag-integrate niini nga module.
Pagbag-o ug Pag-ayo
To ensure FCC compliance and system performance, this device, antenna and/or coaxial assembly shall not be changed or modified without the express written approval of Itron. Any unauthorized modification will void the user’s authority to operate the equipment. WARNING! This device contains no user serviceable parts. Attempts to repair this device by unauthorized personnel may subject the person to shock hazard if removal of protective covers is attempted. Unauthorized repair will void the warranty and/or maintenance contract with your company.
Kinatibuk-ang Deskripsyon
The Itron ACT2 is an electricity metering module which includes a 902.4 MHz to 927.6 MHz transmitter as well as WiFi.
The module operates on AC as well as DC voltage nga gihatag sa usa ka host device.
Mahitungod niini nga Manwal
This technical reference guide describes the installation of the ACT2 for the Itron OPENWAY RIVA CENTRON meter.
Pag-instalar
The ACT2 module will be installed in the Itron OPENWAY RIVA CENTRON electric meter.
Shown are the meter base with metrology board, the board to board connector, the ACT2 module, the display and the inner and outer cover.
I-install ang display sa ACT2 module pinaagi sa pagduso sa metal nga mga pin sa display ngadto sa module connector.
Isulod ang module sa ibabaw nga seksyon sa sulod nga hapin ug ikonektar ang duha ka wired connectors sa module.
Ikonektar ang metrology ug ang ACT2 module gamit ang board to board connector.
Pag-instalar sa ubos nga sulod nga hapin.
Pag-instalar sa gawas nga tabon.
Impormasyon sa Pag-recycle
Ang produkto nga imong gipalit adunay mga circuit board. Sa pagtapos sa mga module nga mapuslanon nga kinabuhi, ubos sa lain-laing mga estado ug lokal nga mga balaod, mahimong ilegal ang paglabay sa pipila ka mga sangkap ngadto sa sistema sa basura sa munisipyo. Susiha ang imong lokal nga mga opisyal sa solid waste alang sa mga detalye bahin sa mga opsyon sa pag-recycle o hustong paglabay.
Pag-label
The following requirements will be applied to any products that use this module:
The end product or host label will include the following text:
Naglangkob:
- FCC ID: SK9ACT2
- IC: 864G-ACT2, Modelo: ACT2
Ang manwal sa tiggamit alang sa bisan unsang produkto nga adunay sulod niini nga module maglangkob sa mosunod nga teksto. Kung ang aparato adunay igo nga kadako, nan kini usab ibutang sa label.
Pagsunod sa Regulatoryo
Ang manwal sa tiggamit alang sa bisan unsang produkto nga adunay sulod niini nga module maglangkob sa mosunod nga teksto:
FCC Bahin 15, Klase B
Kini nga ekipo gisulayan ug nakit-an nga nagsunod sa mga limitasyon alang sa usa ka Class B nga digital device, subay sa Part 15 sa FCC Rules. Kini nga mga limitasyon gidesinyo sa paghatag og makatarunganon nga proteksyon batok sa makadaot nga pagpanghilabot sa usa ka instalasyon sa residensyal. Kini nga kahimanan makamugna og mga gamit ug maka-radiate sa enerhiya sa frequency sa radyo ug, kung dili ma-install ug magamit subay sa mga instruksyon, mahimong hinungdan sa makadaot nga interference sa mga komunikasyon sa radyo. Apan, walay garantiya nga ang pagpanghilabot dili mahitabo sa usa ka partikular nga instalasyon. Kung kini nga ekipo nagpahinabog makadaot nga pagpanghilabot sa pagdawat sa radyo o telebisyon, nga matino pinaagi sa pagpalong ug pag-on sa kagamitan, giawhag ang tiggamit sa pagsulay sa pagtul-id sa pagpanghilabot pinaagi sa usa o daghan pa sa mga musunud nga lakang:
- I-reorient o ibalhin ang nagdawat nga antenna.
- Dugangi ang pagbulag tali sa kagamitan ug tigdawat.
- Ikonektar ang kagamitan sa usa ka outlet sa usa ka sirkito nga lahi sa kung diin konektado ang tigdawat.
- Konsultaha ang tigbaligya o usa ka eksperyensiyadong radio/TV technician para sa tabang.
Ang mga pagbag-o o mga pagbag-o sa kini nga aparato nga dili klaro nga giaprubahan sa Itron, Inc. mahimong makawala sa awtoridad sa tiggamit sa pag-operate sa kagamitan.
Innovation, Science ug Economic Development Canada (ISED)
Nahiuyon ang kini nga digital B aparatong B sa tanan nga mga kinahanglanon sa Mga Pagpataliwala sa Hinungdan sa Mga Hinungdan sa Kagamitan sa Canada Ang operasyon gipailalom sa mosunud nga duha nga mga kondisyon:
- Kini nga aparato mahimong dili hinungdan sa makadaot nga interference, ug
- Kinahanglang dawaton niini nga device ang bisan unsang interference nga nadawat, lakip ang interference nga mahimong hinungdan sa dili gusto nga operasyon.
Under Innovation, Science and Economic Development Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Innovation, Science and Economic Development Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
RF Exposure (FCC/ISED)
“This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.”
Kasaysayan sa Pagbag-o
Ang mosunod nga talaan naghulagway sa mga kausaban niini nga dokumento alang sa matag rebisyon sa ACT2 meter module:
| Rebisyon | Petsa | Deskripsyon sa Pagbag-o |
| A | Hunyo, 2018 | Inisyal nga Pagpagawas |
FAQ
What should I do if I encounter interference issues with the ACT2 Meter Module?
If interference occurs, ensure that the antenna type and gain are approved for use by regulatory authorities. Adjust the settings to minimize interference with other devices.
Can I modify or repair the ACT2 Meter Module myself?
The module is intended for professional installation by an integrator. Modifications or repairs not approved by Itron, Inc. may void the user's authority to operate the equipment.
Mga Dokumento / Mga Kapanguhaan
![]() |
Itron ACT2 Meter Module [pdf] Giya sa Gumagamit SK9ACT2, ACT2, ACT2 Meter Module, Meter Module, Module |
