MULTIBRACKETS 5605 Wall Bracket

Espesipikasyon

• produkto: MULTIBRACKETS 5605 Universal Wall Bracket / Long Reach Arm Mount
• Type: Full-motion articulating TV wall mount (dual arm long-reach swivel)
• Kolor: Itom nga metal nga finish
• Materyal nga: Heavy-duty solid steel construction
• Pagkaangay sa Screen: Fits most flat-panel TVs 65″ – 110″ diagonal
• Max screen diagonal: ~279 cm (110″)
• Kapasidad sa Timbang: Up to 125 kg (~275 lbs) load support
• Suporta sa VESA: Compatible with most VESA patterns from 100×100 mm up to 800×600 mm
• Movement & Adjustment: Full-motion swivel, tilt, and rotate at multiple pivot points
• Sakup sa pagkiling: approx. -5° to +10°
• Swivel/rotation: approximately 60° to +60°
• Extension from wall: up to 980 mm (~38.6″)
• Mga bahin:
  • Dual long-reach arms for flexible viewmga posisyon
  • Smart cable management system to hide cables
  • Partially pre-assembled with a full hardware kit included
• Uri sa Pag-instalar: Wall mount, articulating bracket
• Kolor: Itom

IMPORTANTE!
Your Plasma. LCD. TV, Projector, Projector Screen, or other HiFi equipment represents a considerable value.
If screws are Included they may not be suitable for the material of your wall, ceiling, or floor. Replace the screws with suitable ones if needed.
In case you are unsure regarding any aspects or the mounting of this product,t please
Pagkonsulta sa usa ka propesyonal.

Pasidaan!
Kanunay susiha ang giladmon of ang mga buho kaniadto pagsugod an pag-instalar.

Fits most 65″-110″ flat panel TV

• Weight capacity: 125kg/275 lbs
• VESA compliance: 100×100 200×200 300×300 400×200 400×400 600×400 800×600

WARNING 
Ang grabe nga personal nga kadaot ug kadaot sa kabtangan mahimong moresulta sa dili husto nga pag-instalar o pag-assemble. Basaha pag-ayo ang mosunod nga pasidaan sa dili pa magsugod.

• Ang mga produkto kinahanglan nga i-install sa mga propesyonal.
• Kung dili nimo masabtan ang mga panudlo o adunay bisan unsang mga kabalaka o pangutana, palihug kontaka ang usa ka kwalipikado nga lokal nga installer.
• Ayaw i-install o i-assemble kung ang produkto o hardware nadaot o nawala. Kung kinahanglan nimo ang mga kapuli nga piyesa, palihog kontaka ang imong lokal nga distributor alang sa tabang.
• This product fits most65″-11D”LCD and plasma screens; maximum weight of LCD /plasma screen: 125kg.
• This product has been designed for use on masonry (solid concrete, 2000 PSI density minimum).
• For safe installation. The wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
• Ayaw gamita kini nga produkto alang sa bisan unsang lain nga aplikasyon kaysa sa orihinal nga gidisenyo.
• This product contains moving parts; please use it with caution.
• When installing a flat panel display, please do not damage the electrical wiring or the power source.
• Ang tiggama walay responsibilidad sa pag-mount sa bertikal nga bungbong, o sulagma o sangputanan nga kadaot nga motumaw niini.
• Gisalikway sa tiggama ang bisan unsang tulubagon alang sa mga pagbag-o, dili husto nga pag-install, o pag-instalar sa gitakda nga gibug-aton.
• The manufacturer will not be liable for any damages arising out of the use of, or inabilityto use, the product.

Kaniadto nga lista

PAG-INSTALL

INSTALLATION OPTION 1: Wood Stud Installation (Suitable for 16″ or 24″ apart studs)

1. Use a stud finder to locate the drywall studs and mark the desired installation locations with a pencil.
2. Ibutang ang Wall Plate Template (BB) sa dingding sa gusto nga lokasyon sa pag-install.
3. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations in the middle of the studs.
4. Use a 7/32″ (5.5mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm).

Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H).

NOTA: Do not use Wall Anchor (I) for wood stud installation.

OPSYON SA PAG-INSTALL 2: Pag-instalar sa Concrete/Brick Wall

1. Ibutang ang Wall Plate Template (BB) sa dingding sa gusto nga lokasyon sa pag-install.
2. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall.
3. Use a 3/8″ (10 mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm). Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Isulod ang 6 x Wall Anchor (I) sa mga lungag. I-secure ang Wall Plate sa dingding nga adunay 6 x Lag Bolts (H) ug 6 x Washers (H).

This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place.

Place the top locking bar at the desired position to fix the left slide limit of the arms, and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limits the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate.

WARNING: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.

Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns)
For TVs with smaller bolt hole patterns of VESA 100×100, 100×200, 200×100, and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.

Pag-attach sa TV sa Mount (Alang sa mga Display nga May Dagko nga Bolt Hole Patterns) Para sa mga TV nga adunay mas dagkong bolt hole patterns sa VESA 300×300,400×200,400×400,600×400, 800×600 mm, gamita ang TV brackets ug ang extension bars aron i-install ang TV ngadto sa bukid.

Attach the 2 x TV Brackets to the back of the TV by using screws A+E, B+E, C+E, or Dor G.

NOTA: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at mount-it.com to procure additional hardware kits.

Ensure the screws are adequately engaged with the screw holes on the TV.
Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the T.V.

Hangina g TV On The Wall Mount Arms

Lift the TV (two persons recommended) and hang the TV brackets onto the wall mount extension bars.

Pagsiguro sa TV Diha sa Bukid

Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown ointhe image.

NOTA: Ang pagkapakyas sa pag-secure sa TV bracket ngadto sa mount gamit ang AA Safety Brackets mahimong moresulta sa aksidenteng pagtangtang sa TV gikan sa extension bars, posibleng moresulta sa kadaot sa lawas o kabtangan.

Pag-adjust sa lebel -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level the TV, and tighten the 2 x G bolts to lock the TV in position.

Pag-adjust sa ikiling -5° – +10°

The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the tilt angle of the TV, pull out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the screws.

NOTA: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.

Gamita ang integrated cable management clips sa mga bukton aron i-ruta ang mga kable sa likod o kilid sa TV.

Dimensyon

WARRANTY CARD

MGA MULTIBRACKET “™ Limitado Garantiya

Daghang bracket mga warrant niini mga produkto sa be libre of mga depekto in materyal ug pagkabuhat kay ang mga produkto Garantiya Panahon.

Ang Garantiya panahon magsugod on ang orihinal pagpalit petsa of ang produkto

Tanan Daghang bracket mga produkto mga gitabonan by a limitado produkto garantiya

• LIMA (5) mga tuig kay metal video monitor mounts, tanan mga racksug non-electrical estante mga accessories
• DUHA (2) mga tuig kay gaslifts ug sit-stand mga workstation
• USA (1) tuig kay tanan nagmotor ug/o awtomatiko mga produkto, plastik mamumulong mounts, tanan mamumulong stands, tanan muwebles, tanankahoy (MDF) mga accessories

Alang sa garantiya pag-angkon gihimo sa panahon ang Garantiya Panahon, MULTIMGA BRACKET kabubut-on ilisan bisan unsa depektoso produkto bahin libre of charge. Should a bahin on imong Daghang bracket produkto fail, palihog paghimo anRMA kaso on www.multibrackets.com/support sa paghimo a garantiyapag-angkon. We kabubut-on await imong dokumentasyon ug unya discuss angproblema uban sa ikaw, ug kausa we confirm ang produkto is ubos gubatranty, we kabubut-on barko puli mga bahin sa ikaw. Kini Limitado Garantiyanagabuhat dili tabon ang gasto of pagtangtang ug pagpuli depektoso mga bahingikan sa imong Daghang bracket produkto. Busa, if imong problema nagkinahanglan apag-ayo technician, ikaw kinahanglan pagbayad bisan unsa paghago mga bayranan.

For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part of your Multibrackets product fail, please create an RMA case on www.multibrackets.com/support to make a warranty claim. We will await your documentation and then discuss the problem with you, and once we confirm the product is under warranty, we will ship replacement parts to you. This

Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. So, if your problem requires arepair technician, you must pay any labor charg.es This Limited Warranty extends only to the original purchaser of the product and is automatically void if your Multibrackets product is modified in any way, improperly installed, taxed beyond its stated weight capacity, or otherwise misused or abused.

All Multibrackets products are intended for indoor use only, and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use itsproducts, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicablelaw, Multibrackets disclaims any responsibility for incidental or consequential damages,

Multibrackets M Stockholm, Sweden 2016. www.multibrackets.com

The content of this manual is subject to Change wltheut further notice. The latest vers, on of this manual can be found online under the product name on the website: www.multibrackets.com

 

Mga Dokumento / Mga Kapanguhaan

MULTIBRACKETS 5605 Wall Bracket [pdf] Giya sa Pag-instalar 5605 Wall Bracket, 5605, Wall Bracket, Wall Bracket, Wall, Bracket

Mga pakisayran

• Manwal sa Gumagamit